glockman
I hate Jeep trucks
- Location
- Pleasant Grove
Well, there are enough of us on the board now riding the best bike ever made I figured it would be good to have a thread with things that work and don't work on the 300 like Jetting, head milling, pipes, tires suspension. A one stop shop to compare setups.
I'll start with my current setup that is working really well after fighting jetting for a bit.
Bike 2012 300xc
gnarly pipe
FMF Turbine core 2 silencer
Milled head (not sure of the milling specs, just told it was milled when I bought it)
Yellow spring turned flush
Jetting
162 main
35 pilot
N2ZL needle on 3rd clip
This worked great at 4-5k elevation with temps in the 60's
Bottom middle and top were super crisp.
Suspension is stock and works OK.
I'm running Bridgstone battlecross tires X30 tires. The front sucks. The rear hooks up ok and is wearing pretty well.
I run 10 psi in both tires.
I have a scotts stabilizer that will go on once I get a mount. Anyone have recommendations for which mount they like?
I'll start with my current setup that is working really well after fighting jetting for a bit.
Bike 2012 300xc
gnarly pipe
FMF Turbine core 2 silencer
Milled head (not sure of the milling specs, just told it was milled when I bought it)
Yellow spring turned flush
Jetting
162 main
35 pilot
N2ZL needle on 3rd clip
This worked great at 4-5k elevation with temps in the 60's
Bottom middle and top were super crisp.
Suspension is stock and works OK.
I'm running Bridgstone battlecross tires X30 tires. The front sucks. The rear hooks up ok and is wearing pretty well.
I run 10 psi in both tires.
I have a scotts stabilizer that will go on once I get a mount. Anyone have recommendations for which mount they like?
Last edited: