mdbs14's latest activity

Thank you all for all the help with this project.

Finally up and almost ready to test drive around once I get my driveshafts all figured out. The front seems to fit, the rear will need...

I had it already wired the way i illustrated, and haven't touched it. It will stay like that if it's not wrong. Thank you for all your...

What do you mean if it switches the other way? What other way? Are you still supporting the 0v, 12v on brake pressed theory, or is that...

what are you concluding here?

After digging more into this, I see why you believe that gm want to see 12v when brake pressed, 0v off brake. You are getting that from...

Interesting!! Though all gen 3 LS were wired that way with a closed switch that opens whn brake applies. Does it matter if it's a 4wd...

You need 12v on key on, 0v when brake is pressed down. here is another clear image.

Looked at this again, and made some adjustment. Relay pin 85 to pin 6 on Brake lamp switch Relay pin 86 to ground Relay pin 87 to ground...

Neutral Safety Switch. I need to wire the park/neutral safety which on my 4l60e. It came with this switch and the pigtail. Do we know...

Where did you get that from? Pin C1:33 wants to see 12v all the time when the key is on, 0v when brake is pressed. No ??? Open circuit...

I will search for the Gm circuit diagram for 04 Silverado. With the relay setup with the C3:24 wire, I get 12v on relay pin 30 when key...

This is how I have the TCC relay hooked up. when testing, the ls tcc purple wire has 12v on key on, and drop when brake is pressed.

Ahh!! Yeah No, both of the drive shafts are dictonnected. Thanks. I will connect the front drive shaft and put it in 4x4 and test...

Installed the winters shifter today, not a bad shifter. Am able to shift through all the gears. When the truck is running, gear in...