1967 "SS" 396 El Camino - Demoncamino

anderson750

I'm working on it Rose
Location
Price, Utah
Turn signals fixed. I did not know that there was 2 flasher controllers until I talked to a friend that is a mechanic. I had replaced the flasher in the fuse block, but the signal flasher was tucked up under the dash.

CPP Stage IV Pro Touring kit ordered today as well as the steering box. I got lucky and beat the price increase that is coming to this kit next week, so I saved myself about $500. We are headed into our busy fall racing season, so I doubt I will have this installed before the snow flies.
 

anderson750

I'm working on it Rose
Location
Price, Utah
Decided to crack open the boxes and take a look. Overall the craftsmanship on them look very good.

Upper and lower control arms
5CA17622-199C-4242-9F0A-B401F4CFA98E.jpeg
8FBF4881-C90C-442B-997F-D50FF3F61015.jpeg
Steering box
796A49A1-1F37-4596-9CDB-A0ABC6E1D4BA.jpeg
Front brakes……I think these should stop everything quickly. They offered a free upgrade to the corvette brakes so I obviously said yes.
49D29AA5-9E60-4562-9CBB-EAB83A935FEA.jpeg
3F75DC95-DC77-444B-9747-8FC510C1314A.jpeg
Rear brakes
796A4A15-749F-47E9-BB96-ED69467A591B.jpeg
48C370AB-44F4-4671-BD2B-1E59B1EEFB88.jpeg
Rear arms
701CE5AD-8CA5-42BD-8099-117A5192BB5B.jpeg
 

anderson750

I'm working on it Rose
Location
Price, Utah
I had a shop cut in some 40 series Flowmaster's on it today. Sounds much better......more like a big block. I will probably do all new exhaust sometime next year after I get the suspension on it and do a leak down on it this winter. If the leak down shows everything is good then I may throw a cam in it and call it good for awhile.
 
Top