Better brakes for the LJ

DAA

Well-Known Member
Supporting Member
I just cut that off.

LJ%20Brakes-110W.jpg


- DAA
 

astjp2

Active Member
Location
Riverdale/Alaska
Calipers just clear the flat of the rotor, now for wheel alignment, I did the plumb bob last time and led schwab said it was within spec for thrust alignment. So now I set the from yoke to .2* of from square of the driveshaft angle. The hp will give a little better castor. After alignment, it’s bleed the brakes and see if my wheels fit.
 

Attachments

  • IMG_9672.jpeg
    IMG_9672.jpeg
    263.1 KB · Views: 12
  • IMG_9673.jpeg
    IMG_9673.jpeg
    238.9 KB · Views: 12
Top