- Location
- Grand Junction, CO
- Asking Price
- $7500
- Condition
- Used - Good Condition
Is racing King of the Hammers on your bucket list? Do you dream of KOH Glory? Here's your chance to race the EMC 4600 Class in a S10 Blazer for CHEAP! Get your buddies together, spend some time finishing this killer Chevy... you have 7 month until KOH 2025!!
This is a 1997 Chevy Blazer built to 4600 Class Spec and has had a lot of money, time and beefy parts tossed at it to make it competitive. Here's a breakdown;
Engine - 4.3 litre Vortec with fresh performance build
Competition Cams 875-12 56-430-8 280 Intake .525 valve lift
Comp Cams double springs
Harland Sharp Custom full, self adjusting rocker rollers
ARP rocker studs 135-7201
New timing set
New push rods
PCM was worked on by PowerLabs in Shelley ID and tuned for horsepower
No miles since rebuild, it's been started but not driven.
Transmission - 2001 4L60 Automatic
Transfer Case - NP233 with slip yoke eliminator kit installed. Driveshaft from NP233 to 14 Bolt (2nd Adams Drive Line that bolts up to an Atlas TCase included)
Rear Axle - 14 Bolt Chevy with disc brakes, stock shafts, full spool, Ballistic Fab Shave kit installed, new 5.38 gears from East Coast Gear, full rebuild kit. Ballistic Fab pinion yoke protection (shovel) and 1410 pinion yoke.
Front Axle - GM 2500 9.25 ifs front diff with new 5.38 gears, a Powertrax Lock Rite locker, H2 AWD one piece shaft 33 spline. New extended axles/joints/boots for GM 2500.
Front Drive Shaft – New Adams front drive line to the GM 2500/3500 9.25 axle.
Rear Suspension - New 63" Chevy leaves, new shackles and bushings & traction bar.
Front Suspension - Custom long travel IFS A arms, Ballisitic Fab Uniballs drilled out to 1" hardware, Maxx Suspension adjustable torsion keys and set up for 10" coilovers, Fabtech cradle, shock mounts.
Steering - Full PSC kit for hydro assist including: Power steering pump, reservoir, orbital, PSC power steering pump (ported), PSC Ram 6 3/4 stroke, fluid cooler. The system is installed but has not been used yet, it's all brand new. (Front steering uses BEEFY DOM tubing for strength, same design as Cognito uses but much larger and heavier wall tube and heims.)
Brakes - Upgraded, larger brake booster installed.
Fuel System - RCI 22 gal Fuel Cell with a plastic bladder (still in the box) Approx. 19.5' x 36" x 13". Includes fuel pump, fill tube, cap, ect.
Safety - Racequip Net mounts and Nets with GM buckle style
Misc - New aluminum radiator, beefy steel rear bumper, cold air intake, shock hoops for coilovers, grill & headlights from 2000 Blazer, etc.
Summary... This is VERY much a project, it needs a roll cage, seats & interior finishing. Needs brake lines ran to each wheel, steering needs to be bleed, engine needs to be ran & broken in, fuel cell needs to be mounted, needs 10" coilovers for the front & shocks for the rear, front bumper and winch mount built, etc. This is very much a project vehicle. Over $25k was spent to get it to this point. This could be a 4600 car or just a fun recreational wheeler... choose your adventure!
Price - $7500
Location - Idaho Falls, ID. Listing for @ID Bronco
PLEASEEEE!!! Serious buyers only, don't waste my time if you don't have the $$$.
Cross posted everywhere, it should go fast.
Title in Hand!
No trades!!!
This is a 1997 Chevy Blazer built to 4600 Class Spec and has had a lot of money, time and beefy parts tossed at it to make it competitive. Here's a breakdown;
Engine - 4.3 litre Vortec with fresh performance build
Competition Cams 875-12 56-430-8 280 Intake .525 valve lift
Comp Cams double springs
Harland Sharp Custom full, self adjusting rocker rollers
ARP rocker studs 135-7201
New timing set
New push rods
PCM was worked on by PowerLabs in Shelley ID and tuned for horsepower
No miles since rebuild, it's been started but not driven.
Transmission - 2001 4L60 Automatic
Transfer Case - NP233 with slip yoke eliminator kit installed. Driveshaft from NP233 to 14 Bolt (2nd Adams Drive Line that bolts up to an Atlas TCase included)
Rear Axle - 14 Bolt Chevy with disc brakes, stock shafts, full spool, Ballistic Fab Shave kit installed, new 5.38 gears from East Coast Gear, full rebuild kit. Ballistic Fab pinion yoke protection (shovel) and 1410 pinion yoke.
Front Axle - GM 2500 9.25 ifs front diff with new 5.38 gears, a Powertrax Lock Rite locker, H2 AWD one piece shaft 33 spline. New extended axles/joints/boots for GM 2500.
Front Drive Shaft – New Adams front drive line to the GM 2500/3500 9.25 axle.
Rear Suspension - New 63" Chevy leaves, new shackles and bushings & traction bar.
Front Suspension - Custom long travel IFS A arms, Ballisitic Fab Uniballs drilled out to 1" hardware, Maxx Suspension adjustable torsion keys and set up for 10" coilovers, Fabtech cradle, shock mounts.
Steering - Full PSC kit for hydro assist including: Power steering pump, reservoir, orbital, PSC power steering pump (ported), PSC Ram 6 3/4 stroke, fluid cooler. The system is installed but has not been used yet, it's all brand new. (Front steering uses BEEFY DOM tubing for strength, same design as Cognito uses but much larger and heavier wall tube and heims.)
Brakes - Upgraded, larger brake booster installed.
Fuel System - RCI 22 gal Fuel Cell with a plastic bladder (still in the box) Approx. 19.5' x 36" x 13". Includes fuel pump, fill tube, cap, ect.
Safety - Racequip Net mounts and Nets with GM buckle style
Misc - New aluminum radiator, beefy steel rear bumper, cold air intake, shock hoops for coilovers, grill & headlights from 2000 Blazer, etc.
Summary... This is VERY much a project, it needs a roll cage, seats & interior finishing. Needs brake lines ran to each wheel, steering needs to be bleed, engine needs to be ran & broken in, fuel cell needs to be mounted, needs 10" coilovers for the front & shocks for the rear, front bumper and winch mount built, etc. This is very much a project vehicle. Over $25k was spent to get it to this point. This could be a 4600 car or just a fun recreational wheeler... choose your adventure!
Price - $7500
Location - Idaho Falls, ID. Listing for @ID Bronco
PLEASEEEE!!! Serious buyers only, don't waste my time if you don't have the $$$.
Cross posted everywhere, it should go fast.
Title in Hand!
No trades!!!
