Need electrical help on Sherco

OrangeSkidPlate

OrangeSkidPlate

Active Member
Location
Pocatello
I am attempting to sort out how to make a Sherco bump start. The ECU needs to be "woke up" or powered from hitting the starter button. If you try to roll start without waking it up, nothing happens, no ignition. So I am trying to sort out through the wiring diagram how I can get the ignition to wake up the ecu as well as the start button.

So looking at the wiring diagram with my limited understand of how to read a diagram I am wondering if tapping into pin 17 or 26 on the ecu harness and tying it into pin 46 on the 1136 plug if that would be the ticket?

Any suggestions?
 

Attachments

  • Wiring diagram.JPG
    Wiring diagram.JPG
    158.7 KB · Views: 2
OrangeSkidPlate said:
I am attempting to sort out how to make a Sherco bump start. The ECU needs to be "woke up" or powered from hitting the starter button. If you try to roll start without waking it up, nothing happens, no ignition. So I am trying to sort out through the wiring diagram how I can get the ignition to wake up the ecu as well as the start button.

So looking at the wiring diagram with my limited understand of how to read a diagram I am wondering if tapping into pin 17 or 26 on the ecu harness and tying it into pin 46 on the 1136 plug if that would be the ticket?

Any suggestions?
Click to expand...
What year and model is your bike?
 
You must log in or register to reply here.
Back
Top