Search results

I'm looking at how to eliminate any rattle. The handle mounts will have fuel line between them and the tube. The big pin will have a small piece of rubber on the large end to give it a little tension. The jack itself really can't move much with the big pin inserted. We'll see how bad it is...

Fortunately only one bend per piece. Bender worked very well While I was making steel dust, I built a jack mount that captures it at the base and uses a pin to keep it tight:

Made some progress All cut out - here's what was removed and the first test bend in the bender (1.75" DOM)

Finished wiring in the heated seats. Got a new Bestop top for the scrambler (caught it on sale). Now its time to re-do the roll cage a little so it doesn't destroy the new top (we don't need all that back there - no rear seat passengers). I cut the rear section off when we bought it a few...

The current administration is scrambling to do things to keep it's policies in effect as long as possible

What's the source on this? I'm surprised to see overall fewer voters.

Wanted to make it, but too many things hit us these past 2 weeks

Impressive job! How did it go back together?

Appropriate for the time of year:

Stuck thermostat?

All the BD parts I have bought have been great quality

Took a trip to MT over the weekend. Caught some interesting vehicles Good tag Coming up on this guy to pass, looked like a hockey stick hanging out on the drivers side. Was solid, not bouncing in the wind. Ended up being the fender flare from some front end damage

No emission components on the engine makes up for the lack of higher hp

No one was able to get a good shot of the comet over the past week? We were able to view it, but no good pics

I had heard that Barnes was very close to, or in the middle of the flooding from Helene.

I can hold it for you if you want

I'm finally wrapping up the insulation and OSB install inside my shop. I have a couple things to sell: HF Franklin Drywall lift (used minimally - like new), retail is $250, will sell to RME for $65 (https://www.harborfreight.com/150-lb-capacity-drywall-panel-hoist-58307.html). Worked well for...

Thanks for sharing -very cool cars

Sounds like a great project; my gladiator is not worthy, but I'd volunteer if it was

Does it have to be a light or can it be part of an aftermarket shifter?