Search results

Next was the new radiator. The old one was pretty beat to hell from years of abuse. It had been overheated enough times that the tubes had ovaled out restricting air flow. Im not sad that the wreck finished it off. This go around i went with a dual pass elcheapo one from summit. I...

Straightened the ass on her a bit.

What do you mean "you people"?

I got the spindle all changed and back together. When i was about to put the ring gear back in i noticed the bottom of the diff housing was dented, not cracked surprisingly just dented which is odd for nodular iron. It was dented between the pinion and the bottom of the shave plate i welded...

Noticed the wheel seal was dripping and then noticed wheel looked canted. Spindle is bent. We tore it apart and barely got the shaft out. I scavenged another spindle from my axle pile and cleaned it up on the lathe. I then molested the caliper bracket with a angle grinder and a hammer.

Canned ham*

I machine a small brass knob for my band saw speed selector. The original one was missing sadly but not surprising considering it's from 1953. Here's the cut speed to cut asbestos btw. I also machined a door hole plug. There use to be a dead bolt and a door handle. I replaced the door...

When austin said he had been up for awhile, what he meant is that he was awake for 23hrs putting the interior back together, then doing the exhaust, then ripping the front end apart, then eating breakfast with me waiting for the parts store to open to rebuild the front end, before finally...

@YJ_Auzzy Mint bastard had an impressive looking scissor jack in it. Its a 90s style chev pickup. Mint bastard thread

I think he made the tread in the Torchmate forum which disappeared once Lincoln bought them out.

This is the guy that built This press brake^ Sadly his original thread is gone. heres a post about it however. > https://www.pirate4x4.com/threads/40-shop-press-ideas.1110935/post-15147914

Thank you and jinks. I was pretty damn sore the next day. Ive gained some wisdom and will be seeking a helmet from now on.

New build? I started making this thing 6.5 years ago. .. damn i need to start my new build.

Bent a mirror and the other one just broke the bolt. I straighten out the bent one. Steering wheel was bent and we straightened it too. It tore a radiator hose from the rear of the chassis being shifted a inch. And the light bar tubery might not be savable this time but the light bar still works.

I bumped my head and bruised my arm and leg. Rear of the chassis Is slightly tweaked. it's going on a frame rack later this week. It's old asphalt that's usually pretty covered in gravel. I've drifted it hundreds of times. This time the stickies stuck.

I made this metal holding thing.

Do you have any pics of the inside?