Search results

The dual case coupler... You threw one away?! Please tell me your joking

Ok guys... I need one of these..

Here's one for ya, a local in costa rica told me about this one in the middle of a jungle, after spending about an hour on google earth I found it, then drove to it and sketed it, epic...

Back window is gone, windshield is still there, I hate to smash this thing out please come and get it

Here's the adapter as it sits Here is the crack This is the part I'm most worried about but it hasn't shown any problems yet Back side of the crack

its jb welded right now, has been that way for a minute, ill admit, it isnt the best, but it doesnt leak at all, i really dont want to fork up the coin for a new one, and like i said, its just the corner. the crack does hit an oil port just barely but i used a bunch of jb weld there. ill post a...

ya i used it for a while after and never had any problems, i tried getting marlin to get me a new one but they told me "that isnt possible" denied that their little parts could break... what ever..

thats the right video..

haha jumped my ifs truck.. the whole ifs caved in, the drive line compressed, literaly broke the tcase in half and took the corner off the adapter, luckely its broken in a spot that really doesnt affect the adapter

This is a set of duals I built about a month ago for a buddy. I have a problem, once I start cleaning parts, I cant stop. I really want a solvent tank

A lot of time, a wire brush, mineral spirits, brake cleaner, lots of time, a scraper, screw driver, more time.. ODC mixed with ADD it's a deadly combo

Finally got the dash back together with the inclinometer I even found some sweet red lights in the rice burner isle at checker And while I was in the dash I got my sr5 dash light thing working correctly when the lights are on

Buy my parts! :D

I got the rear case rebuilt and ready to be mated today, here's how it went: I started by tearing it apart I checked all the gears out, and made sure everything was wearing together good, I made sure to inspect the 4.7 gears close Here's a shot of one of the 4.7 gears next to a stock gear I...

Are they 35s? Would that be legal in werock? What do you want for them?

Finally got the 4.7 case clean enough to rebuild

4, 80-90 % good condition, sticky 37x12.50x17 will trade for a nice set of 35x17s

It's a little different green than what I normally do, but it needs to be redone with a different paint

Here is my bracket mounted to the dash pad I cut my tunnel out to raise my drivetrain, this is just a rough cut, I'm sure I'll be trimming it more. I got the 4.7 tcase out, it's pretty dirty and could use a good rebuild before getting mated to another case and getting a disconnect

This is the gauge cluster I really want, it's out of an st5 Toyota tercel, keep your eyes out at the junk yard for me. I want it because it has a fwd indicator which would be cool to have wired up to my disconnect