Search results

Tc pump is mounted in the factory ls truck p pump bracket. luckily one bolt was able to go through the factory bracket into the tc pump squaring it to the engine and lining up the pulleys perfectly. After that i used the old bracket i made for the ford motor, bolted it to the rear of the pump...

This is all the wiring in the entire bronco now. That light switched turns on his rock lights, tail lights, and head lights and the other two are to run the engine and it has a check engine light. Brians pretty adamant about having carpet in there lol.

Ebay intake I think we are going to wrap the computer in bubble wrap and ziptie it in lol. Ole Bullard went full derby car and screwed in a bronco door skin with bullet holes in it into the floor to cover my gigantic sawzall happy hole lol. He even scabbed in a seat mount for the one of...

Added some little SS eyebolts to the roof Austin gave me to bungie down crap. Bald DDDD2 TSL vs bald DDDD2 Trep with same air pressure.

Did a u bolt flip kit on the front with a take off kit from another Toyota we linked. Not sure if yall seen the vanity license plate, it says " BEEP X2" .The idea was to replace all the 4Runners with "Road"Runner Getto shackle lift to level it for now. Ima lower the front hangers and move...

I pulled the pan and the timing cover again after realizing that even with the chain cut that counter balance shaft would still leak all the oil pressure out without that bearing in there. They make a kit to delete these damn things so i just went a head and copied what they sell essentially...

Entertained the idea of a spare tire while repairing a damaged wheel of mine. Previous owner must of ran one with loose lug nuts and wollared the holes out.

Yup, just a small time automotive glass shop we have here. Charged me 75$ I offered cash and he happily took 65$. I took him the frame before I cut the hole and he told me to just keep a decent radius in the corners, we agreed a roll of duct tape would be fine.

Got some engine woes. About 60 miles ago i started hearing a weird whining sound that i chocked up as some exhaust leak, after further inspection i figured it was coming from inside the engine block. I went ahead and dropped the pan and found a wadded up bearing in the pan. Turns out these...

Need any waste oil? I got 20-30 gallons sitting in five gallon buckets with lids on outside my shop waiting to for me to haul to the parts store before I have a ecological disaster.

Schedule 40 2" pipe has only a .154" wall thickness. Sounds like you got some Schedule 160 or heavier.

Why not build a frame to accept a piece of glass? i did on my single seater and the glass only cost 65$installed. I used to spend 50$ every winter on a new piece of lexan as the old one would be too scratched by the end of a season. Glass frame

I got out 3 broken bolts and over sized tapped out some stripped threads in these use bead locks i scored and then mounted my 42" treps for koh runners this year. I plan on making my new buggy around this set. Mountain of stickies. ?

Plastic windshield? Im jealous of the queer steer.

Thats exactly what i meant. Forced air heat exchange for the win. I did see a fan in your original pics.

You should box in the back of your our heat exchanger and run another blower motor to the back boxes in section.

Im only 28. How old are all you boomers lol? I joined right after i graduated High school and got my first 4x4.

Its standard 12' with over head cables. The arms lift 6'. That side of my shop peaks perfectly for the lift to clear my single cab long bed truck at full lift.

It gets a dick if brian aint around while someone is working on his stuff, that is the unspoken rule. ?‍♂️ EL,S steam line plumbed Bung for temp sender. Brian and Cayden detailed the shop today while i serviced my Cummings.

Fired up on first crank and ran good, and the random th400 that a friend dropped off and sat in my yard uncovered for a few months seems to work. More sami hackery. The t case got rotated pretty flat leaving the fill plug useless so we made a trip to the hardware store. Poured in the...