Search results

I would SO buy this if I could fit a dirtbike under it. GLWS!

Black PVC with a Schrader valve to pump it up with a bike pump. Add your shower fittings and go go gadget warm camp shower.

*notes for me* air gap set at 100mm 10W oil. 18.6mm and 18.9mm preload. (Preload screw all the way up).

So many of us have right side up forks on our kid bikes, street bikes, camp/ trail bikes The majority of these bikes use a Damper Rod to control damping. The damper Rod has holes in it that slow the flow of the fork oil under compression and rebound. They're simple and effective but when you...

These early 2000 Jeeps are a cake walk to work on. DS rear lock actuator was sticky, so I replaced it. $47.99. 14 minutes flat. T30 torx, trim prybar and a Phillips screwdriver. Also no act of mechanical sympathy goes unrewarded.... Yesterday the blower fan quit working unless it's on high...

Buffed the headlights.

https://www.motortrend.com/features/0610-4wd-2004-jeep-liberty-concept/

I try to do a mix. 1 source = 1 bias The more I observe sources that disagree the more likely I am able to form my own opinion that even slightly resembles truth. That's why I'm friends with Brian and Chad, whatever they say I just dial it back a notch and I'm good. 😄 🥴

Passenger front window regulator replaced. Phillips screwdriver, trim pry-tool and a 10mm. 45min max. Pretty easy job with a helpful 8 year old.

The ADHD scope creep is real! I noticed on my test drive a slight scraping noise that went away under braking. Upon further inspection, I found a sticky caliper slide and nonuniform pad wear. So off to get new pads. Checked the unit bearings, ball joints and TRE's. Then I found some surface...

I drove it tonight! The TCU has to relearn so I've got to put some miles on it, but it feels good!

Let's try this again. Also, Ben charged me $175. What a stud. $150 (his cost) for the new TC. $25 for the filter and some RTV. $0 Labor to open it and look it over.

It's May day, which means Bountiful secondary water gets turned on. And I get to fix whatever stupid water pipes broke/ leak over the winter and then add another gate valve and sprinkler head. Luckily my shutoff valve was full of dirt and rusted open, so I got to pester my wife into helping me...

Absolutely a great first bike. Mine is a 2022 so very very much still new.

I'm selling that Navi. I quite like it, but no time to ride it lately, other than to the store for eggs and milk. You can come borrow it for a while to see if she likes it. It's pretty great, same size motor as the Grom so it's pretty quick, Honda reliability and the storage space is a huge bonus.

I hate to say it but 33s don't fit on these. A 31 will fit with a 3-in lift and that's about the biggest lift you can get. Even that is kind of iffy unless you do a diff drop. I think two companies make front upper A arms but nobody makes lower arms so the ball joints that handle much more than...

Sold. Apparently I priced it too low since I had 40+ people messaging me overnight but it's good to get rid of stuff

So I saw one of those little razor MX whatevers at the dump yesterday in the metal section and I was going to grab it for you but the front forks were bent

Evaporust works better, but once a chain rusts It's buest to chuck it. Especially on those little ones. Too much slop in the pins and they come off. Ask me how I know 😂