Search results

We were down at the Swell last weekend and it was clear that they got a lot of water in the last storms. We ran the behind the reef trail and the fun section that starts at Choke Canyon had been washed out but the BLM guys fixing it were leaving just as we got there and I made it all the way to...

On my 02 Grand the ABS light came on and it was the wheel speed sensor on the left side. The wire was broken where it was rubbing on the ball joint stub threads. If you get the right code reader you can read out the ABS codes. I can look at my heater box to see if the plug that is dangling is...

The way I have fixed this is to cut the rust out and weld in new metal. It can be tricky since the metal is so thin. On my daughter's jeep the rust was so bad I swapped the body. When I pulled up her floors there wasn't anything there in places.

Many years back I had to move a very expensive rack full of video recording hardware between floors in our building. When I rolled the cart out of the elevator the front roller wheels came off the cart and the rather tall rack of equipment tipped forward enough to dump the monitor off the top...

I think I have a couple in the basement but I'll have to check.

I have been asked to take the scouts on a campout. The place I wanted to take them is closed due to fires so I am trying to convince them to go out to 5 mile so I can take care of two things at once.

I know that some of the small Dodge pickups of the same era share brake drums with the XJ 44, maybe the backing plate also ???

I welded this welding cart up back when my welder wasn't an all in one unit. Its plenty stout but i need space . $35

My 84 CJ8 has the 4.0 (now 4.6 stroker), AW4, and a Dana 300. You will have a fun time with the length of the 4.0 which in mine barely fits with the radiator in its stock position. I used TJ front pulleys and brackets to center the fan. I also used the OBD1 wiring from a 93 Cherokee. Your OBD2...

My son has a couple of them, what size do you need ?

Yes it is for the HP, I'll have to ask him what he would want.

My son in law has an Ected locker for a D30 with 4.88 gears if you are interested.

I'll have to check but most are the stock 3.55 ones.

I'll need to check all of them, I know some will be 3 bolt boxes since they came off of XJs.

I need to clean up the basement and after fixing the rust pile that was my daughter's Jeep I am headed to the scrap yard. I am going through everything and adding weight to the metal pile but wondered if I should throw the following onto the pile or find someone who will take the cores. I have a...

Here are some pictures of the parts.

Here is what I have been working on. My daughter's 96 XJ had horrible rust issues that I didn't want to tackle so I found a 97 body in great shape but missing tons of parts because it had been parted out. I then swapped the 96 drivetrain into the 97 and scrounged up a bunch of parts to replace...

I am wrapping up the body swap on my daughter's 96 XJ and have a pile of parts left over. The main body was rusty but the doors and rear liftgate are in decent shape. The body parts are white and interior parts are grey. The only extra drive train part is an aw4 tranny . I have the hard to find...

The tank and springs will be heading to scrap if no one comes and gets them.

On one of my Jeeps that has a custom gas tank I have had issues of gas leaking out of the filler spout when the tank is full and the jeep is going up a steep hill. I found this online and wondered if anyone has used something like this to help solve the issue of gas coming back out of the filler...