Search results

I have a new PJ flatbead trailer to haul my 92 YJ. Any recommendations on where to install the D-Rings? Are the surface mounted ones good bolted through the cross members or should I have someone weld the d-rings on on the top surface of the edge of the trailer? And where would you recommend...

Updated link - Sorry http://cid-947f6613a773d22f.skydrive.live.com/self.aspx/.Public/JeepNoise1.wav

Please help. I have an engine noise that I am not sure what it is. My jeep is a 92 YJ with the I6 that runs pretty well. It has an aftermarket Banks exhaust system and a throttle body spacer on the engine. But other than that, the engine is stock. Please click on the link to listen to the noise...

Anyone ever thought about doing a weekly mechanic training class for us rookies? Maybe going over basics and then things like maintenance items and even things like basic welding and even differential installs and what-not... Just and idea.

Thanks for the information on swapping those seals. I do worry about doing that myself since I have not did anything such as that EVER. For now I have simply tested the fluid in the DIFF to see it is milkly-like to see if water has went in there and it doesn't seem like it had. So... I simply...

I have a problem where I have diff fluid coming out of my front-passenger side axle tube right below the shaft. It is not coming out fast but appears to be moving quicker than before. I am thinking this is an oil seal issue within the tube. I do not see fluid splatter on the shaft itself...

Thanks again! This is great!

Figured it out. The guy who installed it connected the switches to not an ignition wire, but the same power line that the lights are on. SO... I had to simply turn the lights on and then the lockers work just fine. I tested it front and rear and I am all set. I just haven't tried them during...

Thanks, I will dig into it today and get more info posted soon. Man, you guys are great. I don't even see the PSI in the gauge go down when the things are switched so something is not right. Also, I only see one light on the switches at a time no matter what position they are in after the #1...

Well, I did some work on this and found the install manual and followed the instructions on how to test the locker after install. The things are not working. I lifted the rear on jackstands and with the locker not engaged the tires could rotate independently and then after engaging with the...

I bought a 92 jeep YJ and it has a front and rear ARB and I simply do not know if how to really test the lockers. Any advice would be wonderful. Should I hear some click or anything when they engage? Also, should I see the PSI gage of the compressor go down a bit when I engage them? The guy...