Search results

This was the first time for us to attend EJS - we generally don't like crowds or yahoo drivers on trails with us. But, I've wanted to go back to Moab - we haven't wheeled there since 2014 - not knowing if we'd have a good time or not, we limited our time to Saturday through Monday (23-26 Mar)...

When I bought the scrambler 4 years ago, I got a set of YJ half doors. The passenger door is completely disassembled. I have the door handle, and I think the rods from inside, but what I'm missing is the latch mechanism. I searched online for a bit with no luck. Does anyone have a source for...

This was on my 2002 F350. It is a Reese Titan class 5 hitch with Torklift camper tie downs. The tie down mounts are bolted to the hitch (see pics). Hitch will fit many years of superduty chassis. Includes the hardware and removable tiedown ends.

Happijac bed-mounted truck camper tie down. This was in the front of the bed of my 2002 Ford F350. Its pretty hefty and requires drilling a few small holes in the front of the bed to mount. Could be cut down to fit a narrower bed. Has a little surface rust, but otherwise in great shape...

I bought this new in 2013, been on the truck since then. Planning to get a truck camper in the near future, so this needs to go. Will do a good deal for anyone on RME. Looking through KSL, I think I will advertise it there for $500 (well under similar toppers). I'm not able to lift it, so...

As my shop is getting built I've been looking at tire machines - changer and balancer. Might not get in the budget for a while, but its been a chance to look. Over the years being active duty military, I used a few different machines in the base auto hobby shops. It always makes me mad when I...

Looks interesting; good for someone who doesn't have space to dedicate for a plasma table. They sold out of the "US 120v" units for Cyber Monday. Anyone seen this is in action? https://arcdroidcnc.com/

Don't forget to fly your flag today in respect to all those who have served, and those who have given the ultimate sacrifice. Here is a good video for today:

@DAA? Wow! The 2020 record was defeated by a 4.4-mile target hit. Rifle is chambered in .416 Barrett JACKSON, Wyo. — The world’s farthest long-range rifle shot was fired Tuesday, surpassing the previous record by nearly half a mile...

What a terrible accident. https://nypost.com/2022/09/15/3-killed-after-jeep-falls-off-colorado-cliff-during-tour/

$50. I ran this in a 1982 CJ-8 with a 350 chevy small block. Its copper/brass construction radiator - brand is unknown. There is a trans cooler in the bottom tank. I had the core cleaned and pressure tested about 2 years ago. I replaced this one with a new aluminum radiator.

The 2.5" x 8 " DE ram on my TJ is starting to leak a little bit of fluid out of the passenger side seal. I found the seal kit on the PSC website, so I'll have parts soon. Has anyone rebuilt one of these? Looks like the ends unthreads to access the seals. Is there a special tool for taking...

Watched a video on Bleepin Jeep about it. Has some nice features like swapping from driver's to pass drop with no flip or additional parts. Also said a NP205 case was in work. If similar to the D300 version, should be pretty nice. https://midnightmetalworks.com/products/complete-rock-box

This was in the rear of my 1982 Jeep CJ-8, not sure where it is originally from. It measures 35 inches at the maximum outside-to-outside dimensions. Seat is attached to an angle iron frame which the seat belts are bolted to. There is a small tear along the one seam (in picture). Located in...

I've been waiting almost a month for Tom Woods to build a new front driveshaft for my scrambler. They have been waiting on a shipment of 1310 CVs in order to get it done. I can convert it over to a 1350 CV (they are in stock), but since the Rubicon trip was cancelled, I'm not in a rush. Are...

Have a friend with a 2010 F350 with the 6.4L diesel. Has some sort of turbo issue and an EGR code popped up (right at emission testing time). I haven't had time to look at it. Looking for a good shop. He lives near Huntsville, so a shop near Ogden would be most convenient.

Have front and rear standard JK bumpers off of a 2017 JKU Sahara painted in granite crystal. There are some minor scratches and mars (see pics) - $100 for both, including the front plastic skid 2020 Jeep Gladiator Rubicon rock rails, comes with all mounting nuts and bolts - $100 Located...

I'm in need of a shop to go through a NP208. I attempted to rebuild it a couple years ago, replacing seals, thrust bearings and shift forks. It is definitely improved but is difficult to get into low range. It's a super simple TC, so I think something is wrong with it still. I can get low...

Does anyone have experience building raised garden beds? I'm looking for ideas and possibly sources for materials. My wife wants me to build some for her garden in order to help better control weeds and to be more efficient with watering. My wife has been showing me kits that use galvanized...

Heard a rumor that the Shell plant that produces Rotella motor oil was severely damaged in the winter storms...to the effect that production of the brand will be slow to return. If this is true, might be a good time to buy some before it all disappears...