Search results

Is it a good idea to convert to R-134 from R-12? Is there anything that is negatively affected when doing a conversion, compressor, condenser, ect??? This is a question I got from my dad, I believe that it is a good idea, but he wants more input.

Anyone have any experience with the older Mercedes turbo diesels, I am considering throwing one in my Jeep, in place of a gas engine. If anyone has any ideas, whether this is a bad idea, or what? Also ideas whether one will bolt up to a strong tranny, how it would be done?

My truck started acting up, it will start, I have to floor the throttle to keep it running, run for 30 seconds while floored, and then slowly reduce rpms, then die. Any ideas, I had to leave it at the house I was working at so I can't run any diagnostics

Ok so I am going to build another 14 bolt front axle. I need some answers, rather than retubing the long side, what if I machine out the inside of the tube on the diff side, and machine the outside of the tube to be added to it, and weld them together so the tube is longer(BTW this idea was...

What size lug bolt for Chevy Dana 60 king pin front axle? I use 9/16" threads, also 8 on 6.5. I am looking for a part number and a place to pick them up?

Do HHO generators work, how do they work, does anyone have some evidence that they really produce increased efficiency, is it possible to make one that produces enough fuel that you could run an engine strictly on it(using multiple systems, more batteries, capacitors, ect.) What is the best way...

So my Comanche 4.0 runs like crap, up to specifically 3k rpm it cuts out, and is difficult to take off, but the millisecond it hits 3k rpm it takes off like a screaming rocket. From 3k rpm to 4500 rpm it runs like a new engine. I am thinking TPS but would like some additional input. This is a...

Where would I buy the plug connectors for a wiring harness to fit my distributor For a Chevy 350 w/tbi non-HEI

So I have a 1974 SBC 350 with a 1987 Chevy Camaro TBI setup, with an Affordable Fuel Injection wiring harness. I bought a Distributor, and a 2 wire coil, online. I am wondering how to use the coil and the distributor, to make it run. I have the ECM from a Suburban, it is the 1228747 which is the...

So is the Ford Dana 60 splindle pretty much exactly the same as a Chevy, other than the 5, and 6 hole difference? Also what rotors would I use on a 14 bolt rear axle, when converting to disc brakes? Last thing, is there somewhere I can buy the brackets that hold the caliper on the caliper...

AA has a giveaway here is the info the person might want to claim his prize. I just got it in an email. http://www.advanceadapters.com/custom/2008%20Advance%20Adapters%20Great%20Atlas%20Give%20Away.html

I had a Poly bushing on my wrap bar, and I ripped it in half. So I am going to change over to a Heim/Rod end. Where can I go into locally to pick one up? I am very north but would drive to Logan or Ogden.

I am looking for a place where I can get some large parts laser cut. Is there a place local that I can just take drawings or email some files and have them cut. The material thickness is 1/4".

So what truck do I look for to find 1410 driveshafts, and what truck do I look for to find dana 60 1410 axle yokes, 14 bolt axle yokes, and NP205 yokes? I have been building my own DS's but I like to use existing shaft parts. Does anyone make a CV for 1410 Joints?

I know I will get crap for owning Yukon shafts let alone needing to replace them, but I need to know where I can take them to get the replaced? I used to drive to Randy's R&P but I live here now. So I need a local place. Thanks in advance for the info.

I just moved back here from Seattle, where I was wheeling just about every weekend, now that I am here I have not been wheeling since. I am up from Ogden area, hanging at my parents house and want to meet up with some people to go out tomorrow. Don't know the area too much, but I am very...

I am coming down to Utah the weekend of Memorial which I am wheeling near Logan, and the while visiting my In-laws(they live in Joseph) I would like to meet up with some people and go wheeling during Thursday the 31st, and Friday the 1st.

I am going to be in the U- state, around Memorial weekend, is there somewhere around Logan that is fun to wheel? My parents live in Hyrum, so we want to hit up some local areas that will be fun, and legal. I want some hard stuff, not a drive down a dirt road, some people think that is wheeling...

I saw this on another Forum, and thought it would be interesting where it ends up, it is called the invisible thread. Post responses, and see how many people reply with ???

Hey I am not sure if anyone has placed this on here, but I figured I would try. http://www.nw-wheelers.com/forum/showthread.php?t=9366 Thanks for any help BTW it's not mine, it is for a fellow member