Pike2350
Registered User
- Location
- Salt Lake City
4) used12" 2.0 Sway-A-Way air shocks $300/pair obo
4) new 1.25'' LH Ballistic Fab forged rebuildable joints $180 obo
4) new1.25'' RH Ballistic Fab forged bushing ends SOLD
Air shocks...
They are used, but not with a lot of miles on them. I bought the truck with them on it and have since replaced with Coilovers. They probably have about 5000 miles on them total. The biggest problem is that have sat on the truck for a few years because it didn't get used, so they've developed surface rust.....which I am cleaning off currently. Other then the surface rust they are clean and work fine. I have no idea on valving or any of that...it appears 2 are missing the rubber bump band and 1 of the 2 remaining is split
here are pics...of the worst parts
Ballistic Fab joints.....
these are the rebuildable ends...never used. I bought 8 for my project but ended up going 3 link and only using 3/4 joints on the upper joints...so I have 4 of these in LH thread. There are no bungs for these, as it turns out they were machined poorly and didn't fit the ends well. They have 5/8" mounting holes
Ballistic forged bushing ends ...
These are also new, and for the same reason as the rod ends...was going to do 4 link F/R but ended up going 3-link front and only doing the 1.25" stuff on the lowers. These are brand new as well...and I have somehow lost 2 of the bungs, but 2 have bungs with them. They have 5/8" mounting holes
I can send more pics upon request.
4) new 1.25'' LH Ballistic Fab forged rebuildable joints $180 obo
4) new1.25'' RH Ballistic Fab forged bushing ends SOLD
Air shocks...
They are used, but not with a lot of miles on them. I bought the truck with them on it and have since replaced with Coilovers. They probably have about 5000 miles on them total. The biggest problem is that have sat on the truck for a few years because it didn't get used, so they've developed surface rust.....which I am cleaning off currently. Other then the surface rust they are clean and work fine. I have no idea on valving or any of that...it appears 2 are missing the rubber bump band and 1 of the 2 remaining is split
here are pics...of the worst parts
Ballistic Fab joints.....
these are the rebuildable ends...never used. I bought 8 for my project but ended up going 3 link and only using 3/4 joints on the upper joints...so I have 4 of these in LH thread. There are no bungs for these, as it turns out they were machined poorly and didn't fit the ends well. They have 5/8" mounting holes
Ballistic forged bushing ends ...
These are also new, and for the same reason as the rod ends...was going to do 4 link F/R but ended up going 3-link front and only doing the 1.25" stuff on the lowers. These are brand new as well...and I have somehow lost 2 of the bungs, but 2 have bungs with them. They have 5/8" mounting holes
I can send more pics upon request.
Last edited: