14 bolt full Spool

[Bucking Bronco]

Does anyone know who makes a full spool for a 14 bolt

 

[Meat_]

Weld it.

 

[rockreligious]

Yukon has one. 28 lbs, but there spendy for a spool. like around $250

 

[ChestonScout]

I say weld it and save the cash. If your spending 250 spend another 100 and get a detroit

 

[Bucking Bronco]

Randy's actually wants 400 for the spool and its back ordered I unfortinatly found out I have the gov loc and need either a new case to weld up or buy a spool. Never thought it would cost that much I found detroit's cheaper then the spool. So I think off to the junk yard for a new case

 

[AINT SKEERED]

Randy's actually wants 400 for the spool and its back ordered I unfortinatly found out I have the gov loc and need either a new case to weld up or buy a spool. Never thought it would cost that much I found detroit's cheaper then the spool. So I think off to the junk yard for a new case

You can weld the gov lock.

 

[Bucking Bronco]

I cant even figure out how to pull it apart any advise

 

[mbryson]

I bought a Poly Perf. mini spool. I'm fairly happy with it and I'm never worried if the welds will come apart.

 

[Bucking Bronco]

Ok so I finally niticed the three counter sunk screws that hold the carrier together and I welded the spiders together. I tack welded everything then test fit everything back together worked great so I pulled it back apart and finished all the welds and now it wont go back together. I think I must have warped something or one of the tacks broke and tweeked it
Oh well a standard carrier with a mini spool might be the cheapest route that doesent involve any of my welding

 

[AINT SKEERED]

Ok so I finally niticed the three counter sunk screws that hold the carrier together and I welded the spiders together. I tack welded everything then test fit everything back together worked great so I pulled it back apart and finished all the welds and now it wont go back together. I think I must have warped something or one of the tacks broke and tweeked it
Oh well a standard carrier with a mini spool might be the cheapest route that doesent involve any of my welding

Take out the grinder, grind until it fits.

 

[Tacoma]

Take out the grinder, grind until it fits.

x2. And be sure to fill that thing with weld, don't just weld here and there.

 

[rockreligious]

Randy's actually wants 400 for the spool and its back ordered I unfortinatly found out I have the gov loc and need either a new case to weld up or buy a spool. Never thought it would cost that much I found detroit's cheaper then the spool. So I think off to the junk yard for a new case

probably the cheapest application for a detroit because your installing the detroit guts into the factory case. its what the detroit locker is based on. and the lockrites only replace the drive gears and use the factory side gears because there huge. I believe I can get you a full spool cheaper, but I would go with a detroit.