1990 Cherokee

Owners Name & City- Daniel, Paso Robles California


Make, Model & Year of Vehicle-1990 Jeep Cherokee XJ


Engine-4.0 Liter Straight 6 w/ Towing package


Transmission-Auto


T-Case- stock


Axles- F. Dana 30 R. Dana 35


Suspension- Stock ( for now )


Wheels and Tires-15" American Racing Series44's W/ 30x9.5x15 Futura Enforcer M/T's


Winch-none ( yet )


Favorite Trails- Local River Bed, Banzai


Other- going to be cutting my fenders soon, any advice would be great

Pics:


100_3219.jpg


[ Not full flex just parked kinked ]
100_3218.jpg

l_97019180a15d85042b2ea6a25df93732.jpg

l_d723afc67a53883cfb1e270cea583d45.jpg


 
Last edited:
Click to expand...
no im probally not going to be puting fender flairs on. maybe in the future might get some but i'm not really sure yet.

ok thank man i'l talk to him :)
 
Well if you haven't cut them yet. you should be fine to cut on the body line of the fender. I would use a cutoff wheel but an angle grinder with a cutting wheel will work to. Just look behind where you are cutting before you cut. also i would paint where you cut at with some bed liner or black paint, or you can buy edge trim to put on it.
 
hey guys havent posted on here in a LOONG time sothought i'd post since my last i've done:
rustys 4.5"- sitting a 6" all around
Micky Thompson 33x12.5 Baja claws
Homemade bumper ( not finished but on the jeep )
homemade hitch tire/hilift,jerry can carrier
IM005567.jpg

IM005623.jpg

IM005608.jpg

IM005613.jpg
 
Looks great man, nice work. Not baggin here, but those D-ring mounts dont look to promising to me, how are they mounted, and how thick are they?....looks like your set though, watch your rockers ;)
 
grandmaster said:
Looks great man, nice work. Not baggin here, but those D-ring mounts dont look to promising to me, how are they mounted, and how thick are they?....looks like your set though, watch your rockers ;)
Click to expand...

thanks man, and yeah there not done yet haha. but the 1/4" that is stickin out goes all the way to the bumper mounts and im going to notch the bumper and add 1/2" on the side of it to reinforce it.

and some rock rails will be my next project haha :)
 
I like the baja claws!

a cheap way to upgrade your steering is grab some from a V8 grand

or sleeve your tie rod with some larger tube and weld a gusset onto the draglink where it intersects with the tierod.
 
i've heard about doin that ( the V8 swap ) are there any certain years?

and thanks man, they've been doin pretty good.not sure if im gona get them next time tho. tryin to decide between mastercraft courser MT's or some treadwrights
 
You must log in or register to reply here.
Back
Top