2.5" Coilover Springs (for 2.0" coilovers) - 3 different sizes/rates

Herzog

Herzog

somewhat damaged
Admin
Location
Wydaho
All coils ran for 1 trip. All in excellent condition, like new.
I decided to go with slightly heavier rates on my rig so these have been sitting in my garage for quite a while. :)
$40 for each pair ($20/ea - compared to $36/ea new)

Located in SLC valley. Will ship (buyer pays shipping)

1st set: 225 lbs./in. Rate, 14 in. Length - SOLD
IMG_20130818_170000.jpgIMG_20130818_170006.jpg

http://www.summitracing.com/parts/sum-142-5225
This one actually has some scuffs on the one coil.


------------------------------------------------

2nd set: 80 lbs./in. Rate, 12 in. Length
IMG_20130818_170044.jpgIMG_20130818_170051.jpg
http://www.summitracing.com/parts/sum-122-580

------------------------------------------------

3rd set: 125 lbs./in. Rate, 10 in. Length
IMG_20130818_170125.jpgIMG_20130818_170131.jpg
http://www.summitracing.com/parts/sum-102-5125
 
zukijames said:
I'm trying to figure out I can mount those 80s on the back of my rig
Click to expand...

I used the 80 lbs./in. spring as a secondary on top of a 125 lbs./in lower spring, for reference. It was a very nice ride but the back of the buggy was just a little to heavy with the extra gear I decided to permanently carry so I bumped up to a 110 lbs./in upper. Not a huge jump by any means. Yours is probably a lot lighter in the back so it might work very well.
 
You must log in or register to reply here.
Back
Top