2004 TJ BUILT!!!

[skippy]

I am selling the TJ I just finished, I think I want to build an LJ...

Front axle-
5.13 gears
Spartan Locker
4340 35 spline inners and outers
Yukon 35 spline hubs
high steer

Rear axle-
5.13 gears
Yukon Zip Locker (air)
35 spline 4340 shafts

Suspension-
Teraflex LCG long arm with 4" stretch
Front 2.5"x16 coilovers with remote reservoirs
rear 2.0"x14 coilovers with remote reservoirs

Genright stretch gas tank
Genright aluminum crusher corners
Genright stretch rock sliders
37x12.50x17 Goodyear MTRs
Raceline RT232 Beadlocks
Currie Antirock front sway bar
Highlined hood with Rokmen front fenders
All body armor was painted professionally with base/clear paint

4.0
AX15
4.3 2 speed atlas transfer case

Jeep has 130k on it
build has 6 miles on it.....


$23,000

At its current ride height it has about 7" of uptravel so if you prefer to be a low rider it has plenty of room to lower it down.

 

[_Auzzy_]

damn thats good looking! good luck man

 

[tacoman]

That's pretty bad ass it would look even better with have doors

 

[skippy]

That's pretty bad ass it would look even better with have doors

Buy and you can put whatever doors you want on it!

 

[Jeremed]

What axles? Any more pics?

 

[skippy]

What axles? Any more pics?

Sorry high pinion dana 60 front

dana 60 rear

both have 35 spline 4340 shafts...

I dont have any more pictures but I can get some.

 

[mierdota]

Wow that thing is beautiful wish I had the dinero, GLWS

 

[mesha]

who forgets their rig has 60s?


A high roller, that's who.

 

[skippy]

who forgets their rig has 60s?


A high roller, that's who.

I hate you.

 

[N-Smooth]

who forgets their rig has 60s?

A high roller, that's who.

Truth! Hahaha

 

[Bart]

Just stretch it. You'll be ahead in the long run.

 

[skippy]

Just stretch it. You'll be ahead in the long run.

Here comes Bart with the logical thinking to rain on my parade....

 

[idahoyj]

Just stretch it. You'll be ahead in the long run.

Here comes Bart with the logical thinking to rain on my parade....

With your skills/tools, you could knock out the LJ conversion in a weekend!

 

[skippy]

With your skills/tools, you could knock out the LJ conversion in a weekend!

I could but if there is one thing I hate more than Mesha and XJ Nate its sheetmetal work... My skills are really lacking in that department. I guess thats a really good reason to jut stretch my TJ into an LJ

 

[mesha]

I could but if there is one thing I hate more than Mesha and XJ Nate its sheetmetal work... My skills are really lacking in that department. I guess thats a really good reason to jut stretch my TJ into an LJ

You need to sell this to make room for LJ project "Scrooge Mcduck". That is how vagillionaires roll.

One less daily swim in your silo filled with gold would free up time to learn sheet metal work.

 

[Kiel]

vagillionaires? I can only guess

 

[mesha]

vagillionaires? I can only guess

And your guess would be correct

 

[N-Smooth]

I could but if there is one thing I hate more than Mesha and XJ Nate its sheetmetal work... My skills are really lacking in that department. I guess thats a really good reason to jut stretch my TJ into an LJ

And here I am thinking I wonder how my good friend Ryan's TJ deal is going, I'll check the thread. Ouch. You're just mad because you didn't get to huck your rig this weekend

 

[Bart]

Here comes Bart with the logical thinking to rain on my parade....

It's the same thing I told N8R8R. It's not that bad

Measure, brace, measure, cut, measure, weld (110 is best and spot weld, no extended lines), reinforce, body work, paint, and run.

 

[bryson]

Lets see some action shots! Oh wait...