Cruiser
look what i can do!!
Looking to sell my Toyota, Or part depending….
It is ugly but would be a great rig to use for another project. TONS OF GOOD PARTS!
It is wheelable and will conquer any trail you can point it at however needs some maintenance and a cosmetic uplift!
Front axle: ARB (rebuilt recently),4.10’s, Longfield 30 spline cromo’s, Vented rotors, Longfield cromo 6 pin hub flanges, 1.5 in spacers, hysteer, hydro assist. Homemade 6 bolt steering arms/knuckles. Housing is gusseted, trussed, plated. 3rd member bolts upgraded to 3/8 grade 8 fine thread. SERIOUSLY TUFF!
Rear axle: welded, 4.10’s, trussed, Aluminum 4 link, rear disk, 1.5” spacers. (Spare rear spooled third)
22re desmoged, bored .30 over, decked, milled, cam, header, adjustable timing sprocket. Runs like a raped ape but has a funny tic that has been there for the last 3 years and has never changed.. leaks oil
3 core radiator
power steering cooler
5 spd tranny.. Loose shifter, Needs new plastics.
Duel cases, rear case has 4.1-1
6 gal plastic fuel cell.
Toyota booster w/1 ton GM master cyl.
CV DOM drivelines front and rear. (Spare identical rear)
Line lock
Steel 15” wheels, 38” (well used) Swampers
I’ll be keeping the rear mounted winch and bead locks that are on it in the pictures.
I love the rig but would like to save some money and have no plans to use it in any near future. Will gladly take you out for a ride in it. It’s not pretty but it’s hard to change a truck that works SOO WELL. There is video floating around of it doing suicide hill, upper hell waterfall and eagles nest all unassisted. I was the 2nd truck to ever complete arrowhead canyon and pioneered many of the new favorites in Sand hallow.
I believe this truck would be best stripped to frame, resealed and made into an F-toy. If there is enough interest in it to part I will do so. If you don’t mind ugly it will take you anywhere and you can make bling bling rigs look like they spent too much money!
I’m only selling it because I have wheeled every trail within a reasonable distance from home and I have other interests in being able to go back to school and spend more time training for I have some fights coming up in the
next few months hopefully. $3000
RME is giving mt trouble with pic's so... Give me a min.
It is ugly but would be a great rig to use for another project. TONS OF GOOD PARTS!
It is wheelable and will conquer any trail you can point it at however needs some maintenance and a cosmetic uplift!
Front axle: ARB (rebuilt recently),4.10’s, Longfield 30 spline cromo’s, Vented rotors, Longfield cromo 6 pin hub flanges, 1.5 in spacers, hysteer, hydro assist. Homemade 6 bolt steering arms/knuckles. Housing is gusseted, trussed, plated. 3rd member bolts upgraded to 3/8 grade 8 fine thread. SERIOUSLY TUFF!
Rear axle: welded, 4.10’s, trussed, Aluminum 4 link, rear disk, 1.5” spacers. (Spare rear spooled third)
22re desmoged, bored .30 over, decked, milled, cam, header, adjustable timing sprocket. Runs like a raped ape but has a funny tic that has been there for the last 3 years and has never changed.. leaks oil
3 core radiator
power steering cooler
5 spd tranny.. Loose shifter, Needs new plastics.
Duel cases, rear case has 4.1-1
6 gal plastic fuel cell.
Toyota booster w/1 ton GM master cyl.
CV DOM drivelines front and rear. (Spare identical rear)
Line lock
Steel 15” wheels, 38” (well used) Swampers
I’ll be keeping the rear mounted winch and bead locks that are on it in the pictures.
I love the rig but would like to save some money and have no plans to use it in any near future. Will gladly take you out for a ride in it. It’s not pretty but it’s hard to change a truck that works SOO WELL. There is video floating around of it doing suicide hill, upper hell waterfall and eagles nest all unassisted. I was the 2nd truck to ever complete arrowhead canyon and pioneered many of the new favorites in Sand hallow.
I believe this truck would be best stripped to frame, resealed and made into an F-toy. If there is enough interest in it to part I will do so. If you don’t mind ugly it will take you anywhere and you can make bling bling rigs look like they spent too much money!
I’m only selling it because I have wheeled every trail within a reasonable distance from home and I have other interests in being able to go back to school and spend more time training for I have some fights coming up in the
next few months hopefully. $3000
RME is giving mt trouble with pic's so... Give me a min.
Last edited:
