Any ZJ fans here? Take a look at this.
- Thread starter JoeT
- Start date
Tacoma
Et incurventur ante non
- Location
- far enough away
Holy crabcakes!
That's pretty slick... is it working alright? Anything binding, not doing what he wanted, etc etc???
He should sell those.
That's pretty slick... is it working alright? Anything binding, not doing what he wanted, etc etc???
He should sell those.
Zombie
Random Dead Guy
- Location
- Sandy Utah
Very nice work. I might have to talk to him when it comes time for my grand to grow a little more. Where are his muffler and ABS pump?
Sweet.
I respect and admire the effort, but at some point, you have to cut your losses and realize that you are putting all that time and effort into a 5500 lb sherman 4x4.
Now to go and run an actual trial. Poser flex pics don't mean it works ;D
Cody
I respect and admire the effort, but at some point, you have to cut your losses and realize that you are putting all that time and effort into a 5500 lb sherman 4x4.
Now to go and run an actual trial. Poser flex pics don't mean it works ;D
Cody
Zombie
Random Dead Guy
- Location
- Sandy Utah
ok fine... I'll wait. Where is his muffler?
Zombie
Random Dead Guy
- Location
- Sandy Utah
dammit. I'm not a patient man. Oh well.
Thats a great right up. I have been toying with the idea of doing this to my 5.9 when it grows another inch or so. I really like his rear four link, and I'm very curious where his muffler ends up. I can't figure out where I'd put mine if I go this way.
Thats a great right up. I have been toying with the idea of doing this to my 5.9 when it grows another inch or so. I really like his rear four link, and I'm very curious where his muffler ends up. I can't figure out where I'd put mine if I go this way.
I'm with Cody on this one. Lots of work into something that big, well to each his own I guess. The work on it looks good. I had a friend with a long arm kit that looked close to this, worked really well. Is your brother getting rid of the front dana 30 I hope. The weight of the ZJ broke my friends front dana 44 a few times. Good luck with it.
Last edited:
Tacoma
Et incurventur ante non
- Location
- far enough away
JeepinJoe said:
I'd be happy to test it for him. All my junk is taken apart and in pieces at the moment.
You have to look at it from my perspective...
I take my family (wife and 3 kids) camping and 4 wheeling. This way I get a rig that will ride great on the road and run smooth off road.
The rig is going to be built up fairly stout, but I am keeping my D30 and 44A until they fail.
Yes I definitely need some real action shots. However It would need to be able to move it to get some good pics.
I have been very busy with work (a good thing) and have not been able to do much lately.
I do appreciate the nice comments
Jared
I take my family (wife and 3 kids) camping and 4 wheeling. This way I get a rig that will ride great on the road and run smooth off road.
The rig is going to be built up fairly stout, but I am keeping my D30 and 44A until they fail.
Yes I definitely need some real action shots. However It would need to be able to move it to get some good pics.
I have been very busy with work (a good thing) and have not been able to do much lately.
I do appreciate the nice comments
Jared
Last edited:
Jeremy
total tacoma points: 162
- Location
- MAGNA, land of chewy brown water
(i ask)well what are you doing right now?
(you reply) surfing on RME.
(i scold) get off the computer and get to work. you are running out of time.
(you reply) surfing on RME.
(i scold) get off the computer and get to work. you are running out of time.
Zombie said:
I'll get a writeup done one of these days. I like the ARB location.
I did move the solenoid and air line out into the engine compartment. This way the compressor is protected and kept clean and the solenoid can drip oil outside not on my wiring...that was not cool.
The muffler is not installed yet, but this is where it is going to be.
Attachments
Last edited:
No, I was drunk and pissy. I think the ZJ is awesome and I think it's awesome the engineering you're putting into it. If you need a family hauler, I don't think there is any better rig.
It looks great and it seems like you know what you're doing since you've gone through a couple stages already. I remember your other suff from last year.
For some people, going to that extent, and redoing, and redoing until it's right can be costly and frustrating. I think for those people, buying Clayton's or Kevins kit is a better idea since it's proven and ready to go. But, if you have the time, resources, and know how doing something like you did is awesome and fulfilling.
Cody
It looks great and it seems like you know what you're doing since you've gone through a couple stages already. I remember your other suff from last year.
For some people, going to that extent, and redoing, and redoing until it's right can be costly and frustrating. I think for those people, buying Clayton's or Kevins kit is a better idea since it's proven and ready to go. But, if you have the time, resources, and know how doing something like you did is awesome and fulfilling.
Cody
Zombie
Random Dead Guy
- Location
- Sandy Utah
S you are ging to run a small stright through style muffler? Cool... watch the heat on the plastic bumper. I've got a big plastic booger on my 5.9 tip from a kid who decided he needed to smack into my jeep in a parking lot. Thoe bumpers melt fairly easy.RUYellow said:
Next question, where is that compressor... I know I recognise that location, but I'm drawing a blank... one of thoes things that I know I've looked at, but I don't know where. Isit under the dash? Behind the dash?
I'm planning on putting a compressor where the stock air intake box is now. That will come oafter my free hood scoop and custom intake assembly. I didn't really want a custom hood look, but I want to free up some space, and get some more air flow into the motor. I'd love to check this thing out in person sometime. let me know when you get it done, or if you need ahand wrenching sometime.
Nice ZJ dude... great work. I even like the color.
Edit Damn... just noticed you are in idaho. Lemm know if you get it done for easter. I'd love to see it live.
Yes the compressor is under the dash.
ARB Air Compressor write up
Here is a pic of my exhaust system. I might melt the bumper, I want to build a steel one anyways. I will wrap it with heat shield.
ARB Air Compressor write up
Here is a pic of my exhaust system. I might melt the bumper, I want to build a steel one anyways. I will wrap it with heat shield.
