anyone with a 66 mustang?

airmanwilliams

Well-Known Member
Location
Provo, Utah
Anyone here have a 66 mustang? My younger brother has a 66 that he is fixing up and he wanted some of my led lights for his dash. I want to send some of these leds as a christmas present but dont know the quantity or type of bulb the cluster takes. If you have a 66 mustang that you can pull the cluster from and get me the quantity of each type of bulb and color as well as the license plate bulbs and what ever other interior bulbs there are I will replace yours as well.
 

Navigator

Active Member
Location
Provo
I have a '66 mustang in my garage, you are welcome to stop by tonight, tomorrow or whenever if you want to take a look and see what you might need. I will pm you my #
 

airmanwilliams

Well-Known Member
Location
Provo, Utah
Thank you Navigator, sent you a pm. Here are some photos of my brothers. From talking to him he is going to go alittle different and will change the front bumper up some, install a custom laser cut grill with some dually lights, light bar in the rear along either side of the gas cap, and will be installing I think some type of 68 or so taillights that he says are sequential(sp?) like the newer mustangs.
 

Attachments

  • 986557_614943248549861_528193863_n.jpg
    986557_614943248549861_528193863_n.jpg
    43.4 KB · Views: 11
  • 1078002_614943181883201_852961703_n.jpg
    1078002_614943181883201_852961703_n.jpg
    82.1 KB · Views: 12
  • 1082754_614943221883197_1054239395_n.jpg
    1082754_614943221883197_1054239395_n.jpg
    73.3 KB · Views: 11
  • 1186173_630492063661646_622528632_n.jpg
    1186173_630492063661646_622528632_n.jpg
    67.8 KB · Views: 13

airmanwilliams

Well-Known Member
Location
Provo, Utah
Yes he has done quite a bit of work since these photos were taken and has alot of parts already gathered and sitting at my parents place waiting to go in, sure wish I was there and this things would be all prepped for paint already and interior stripped and coated with por15. Once the interior is done and the outside is prepped and all rust gone then the leds and fabricating starts but I am going to be gathering some stuff slowly with the help of my father to go in this. The reasoning for me to be getting the leds right now for him is I have a bunch of bulbs, dually lights, and can get the bars cheap from my supplier.
 

Rock Taco

Well-Known Member
Location
Sandy
Now we know where your disdain for fords comes from. Its all because you miss your first car. Who knows where all your other issues come from. :D
 
Top