Awesome Motor Mounts!!

[_Auzzy_]

Well do to a recent exploration I snapped my motor mounts like twigs (little 4 popper never seizes to amaze me :greg so when I started exploring the local stores, turns out the block brackets are a dealer part. well went to a dealer, turns out just one mount was $167.17 for the passenger side, and $145.25 for the driver side, plus frame brackets are $34 a side. to hell with that!!

After cruisen the local junkyards a guy suggested this site to me and now I have a whole kit ordered!

www.browndogindustries.com

All there stuff converts the stock stuff to a minimum of 1/4" plate steel and grade 8 bolts, nuts, and washers!! I bought the whole kit for $239.95 with free shipping versuses $368 or so plus shipping would be outrageous!

Sooo sense I was able to break one of these with a 4cylinder I thought this would be a nice upgrade for all yall 6 + cylinders!

 

[Bart]

I like these.
http://www.lmt4x4.com/MOR-JM25840.html?id=cZXLRX2P

 

[1993yj]

I have the M.O.R.E. ones too, for 5+ years now. Interesting that they both look identical...

 

[Badger]

I would not put grade 8's into the block itself.If you ever break another bolt you will not be able to easy out the broken bolt.

 

[Herzog]

I have the M.O.R.E. ones too, for 5+ years now. Interesting that they both look identical...

I run the M.O.R.E. bombproof mounts in my buggy. Love'm.

 

[Brett]

I like these.
http://www.lmt4x4.com/MOR-JM25840.html?id=cZXLRX2P

Just slightly cheaper too

 

[_Auzzy_]

Well my main problem was I run a 2.5Litre and I couldn't find any block brackets at the junkyard and mine is smashed in half so I don't want to weld it. new ones are the only way to go and M.O.R.E. didn't make any and midstate couldn't find any after market ones

 

[JeeperG]

I run the M.O.R.E. bombproof mounts in my buggy. Love'm.

I run the one inch raised M.O.R.E. bombproof mounts on my YJ 2.5 and hate them.

 

[Greg]

I would not put grade 8's into the block itself.If you ever break another bolt you will not be able to easy out the broken bolt.

Weld a nut on the broken bolt, that's a much easier solution than an easy-out. I've had good luck with that procedure, used it a handful of times.

I run the one inch raised M.O.R.E. bombproof mounts on my YJ 2.5 and hate them.

Why? I'm just curious as to the reason... I have a set of M.O.R.E. bushings and sleeves that they make the motor mounts out of for my ratrod project.

 

[JeeperG]

Why? I'm just curious as to the reason... I have a set of M.O.R.E. bushings and sleeves that they make the motor mounts out of for my ratrod project.

Mostly I don't like mine because of the engine vibrations that seem to resonate throughout the whole Jeep, mirrors vibrate so bad I can't see out of them, steering wheel vibrates and various other loose Jeep parts.

Other then that they are stout and have been on my jeep for like 6 years, If I get around to doing an engine swap I will probably use something else.

 

[Caleb]

I would not put grade 8's into the block itself.If you ever break another bolt you will not be able to easy out the broken bolt.

Why not???

 

[BioNuke1]

Try a NEW drillbit lol

 

[gijohn40]

Mostly I don't like mine because of the engine vibrations that seem to resonate throughout the whole Jeep, mirrors vibrate so bad I can't see out of them, steering wheel vibrates and various other loose Jeep parts.

Other then that they are stout and have been on my jeep for like 6 years, If I get around to doing an engine swap I will probably use something else.

thats just gentile your driving on... lol... when you getting a new engine to put in that heep

 

[Badger]

Why not???

easier to drill into a grade 5 bolt then a hardened grade 8.Not saying it can't be done ,its just easier.

 

[kkemp]

The dealer is certainly proud of those! Checker and Autozone have OEM ones for around $20. I don't know how good they are. I was thinking about getting those. I don't really like having all the vibration either, so I've not been wanting to get the MORE ones. What's wrong with the OEM mounts? Are they just too weak?

 

[_Auzzy_]

yeah the mounts them selvesa are a weak rubber and wear really quick, I ripped one in half after 8 months. and I tryed the poly's, hard as rocks but send vibes bad, but Its fixed by putting like a thick piece of leather between the mount and frame. thats what I did. and the motor brackets (the silver cast aluminum ones on the block itself) just don't hold up to much stress apperently.

 

[_Auzzy_]

Welp, got my motor brackets in! need to install my motor back in now but its been way to dang hot! so instead I took my new pair of 3/4 axles to be cleaned up and painted!! the black is POR-15, a rust reducing/ stopper and hard as nails. then I got bored and painted the diff and bolts lol now I'm just trying to find parts for my front 44. needs new cage straps, yoke, spring perches, u-bolts, and steering parts.