B.a.m.f two

Gravy

Ant Anstead of Dirtbikes
Supporting Member
you built the skid for the 14 bolt on the wrong side ;)
those lines and the rear single shear upper link mounts remind me of a twisted customs rig.

Nice job! Cage work is fantastic!
I really like the windshield gussets, looks like angry eyebrows
 
Last edited:

tc meiser

-customeiser-
Location
herriman, utah
wj zuk thanks man the truss is not even done im going to do a few thins too it ;) that is the upper link frame side mount and yes i will double shear it man ....you have too!

bart im not shooting for it im going to it ha ha ha no hopefully i can get it done. thanks man

gravesdigger those are b.a.m.f. customs lines dude come on ....ooooch j/k :rofl:
 

tc meiser

-customeiser-
Location
herriman, utah
update, update, update

As far as the front of the buggy goes, i have got just about everything mounted i think. There are some tight tolerences but i think it will all work together. here is a few pics of the front end, i wanted something that would look good without running a hood. I got the radiator mounted. It is a after market radiator for a wrx sti. I am running it upside down to make the flow of the hoses really simple. Then it is also mounted, my tranny cooler in front of the radiator. i moched up the front shocks the lower tabs are going to be like that. the upper tabs i have to still build.
 

Attachments

  • brads truck 010.jpg
    brads truck 010.jpg
    182.4 KB · Views: 50
  • brads truck 011.jpg
    brads truck 011.jpg
    183.5 KB · Views: 45
  • brads truck 009.jpg
    brads truck 009.jpg
    187.3 KB · Views: 44
  • brads truck 012.jpg
    brads truck 012.jpg
    182.9 KB · Views: 46
  • brads truck 014.jpg
    brads truck 014.jpg
    182.7 KB · Views: 42
  • brads truck 015.jpg
    brads truck 015.jpg
    188 KB · Views: 54

tc meiser

-customeiser-
Location
herriman, utah
this is a very blurry pic, but if you can tell, that is the passenger side header, which i am running on the drivers side, and vica versa. This will allow me to run the exhaust in front of the motor and down the drivers side which gives me room to run my drive line on the passenger side. i've also got my ecm mounted directly under the battery mount to allow easy access for wires. I finished mounted the front of my seats. and also built my center council. i used a old amo box that i found i also found a rear view mirror off of my samuri years ago and decied to throw it on the buggy for the hell of it. i built my rear dive line using three other drive line i had laying around. its damn near two inch solid just jokin but really. ;);)
 

Attachments

  • brads truck 013.jpg
    brads truck 013.jpg
    182.4 KB · Views: 28
  • brads truck 017.jpg
    brads truck 017.jpg
    182 KB · Views: 32
  • brads truck 019.jpg
    brads truck 019.jpg
    182.6 KB · Views: 36
  • brads truck 025.jpg
    brads truck 025.jpg
    183.5 KB · Views: 35
  • brads truck 028.jpg
    brads truck 028.jpg
    181.8 KB · Views: 33
  • brads truck 029.jpg
    brads truck 029.jpg
    181.2 KB · Views: 31
  • brads truck 024.jpg
    brads truck 024.jpg
    184.4 KB · Views: 33
  • brads truck 023.jpg
    brads truck 023.jpg
    169.3 KB · Views: 32
  • brads truck 021.jpg
    brads truck 021.jpg
    183.3 KB · Views: 35

tc meiser

-customeiser-
Location
herriman, utah
here is a coulpe of pictures of the rear driveline that i built and a couple of the front shocks as they are moched up. And the rear limiting strap.
 

Attachments

  • brads truck 030.jpg
    brads truck 030.jpg
    186.3 KB · Views: 21
  • brads truck 031.jpg
    brads truck 031.jpg
    182.3 KB · Views: 22
  • brads truck 032.jpg
    brads truck 032.jpg
    180.1 KB · Views: 16
  • brads truck 042.jpg
    brads truck 042.jpg
    180.9 KB · Views: 26
  • brads truck 045.jpg
    brads truck 045.jpg
    186.6 KB · Views: 17
  • brads truck 039.jpg
    brads truck 039.jpg
    185.4 KB · Views: 22
  • brads truck 040.jpg
    brads truck 040.jpg
    189.4 KB · Views: 18
  • brads truck 041.jpg
    brads truck 041.jpg
    182 KB · Views: 27

tc meiser

-customeiser-
Location
herriman, utah
this is a few at ride height it is 6 feet at top and a 22 inch belly with a wheel base of 114 its a pretty low bastard
 

Attachments

  • brads truck 016.jpg
    brads truck 016.jpg
    184.4 KB · Views: 65
  • brads truck 033.jpg
    brads truck 033.jpg
    183.9 KB · Views: 57
  • brads truck 034.jpg
    brads truck 034.jpg
    183.2 KB · Views: 121

reddman

Fabber
Location
SL,UT
edit:

I deleted my post as a courtesy to TC's dad (a friend of mine), who shares the same name as his son if I'm not mistaken. Tom (the elder) has been instrumental in getting this issue closer to resolution. I don't want to drag anyone through the mud, because it's impossible to sling dirt without getting a little dirty yourself. It sure is crazy how six months of inaction can be so effectively jumpstarted by a public calling out. If payment of the debt actually comes to fruition, I'll delete this post and the other thread.

-Redd
 
Last edited:

waynehartwig

www.jeeperman.com
Location
Mead, WA
His dad pulled the ad and I thank him for it. Hopefully this is the begining of the end of this story.

I wonder what happened. Seems like the dad is a stand up guy, so why not the kid? Typically if the kid is trash so are the parents. I feel sorry for his dad, having to bail his kid out of this kind of crap...
 

CJ Matt

Registered User
I wonder what happened. Seems like the dad is a stand up guy, so why not the kid? Typically if the kid is trash so are the parents.

I have to disagree with you on that. An example would be siblings that are total opposites of each other and obviously have the same parents so it doesn’t mean great parents or bad parents always have the same result in their kids.
 

waynehartwig

www.jeeperman.com
Location
Mead, WA
I have to disagree with you on that. An example would be siblings that are total opposites of each other and obviously have the same parents so it doesn’t mean great parents or bad parents always have the same result in their kids.

We can agree to disagree on this one. I've worked with a LOT of kids and parents in my time and while it's not always the case, it is most of the time. Your exception creates the rule.
 
R

rockdog

Guest
We can agree to disagree on this one. I've worked with a LOT of kids and parents in my time and while it's not always the case, it is most of the time. Your exception creates the rule.

Sorry, But I can't remain silent on this one. BUULLLSSH*T !
Oh, And your more than welcome to disagree with my opinion.

From a father who has raised his kids to adulthood. ;)
Let us know how the road map you have in place for your kids turns out in the future. I have three LEO's in our family. And your opinion just smacks of LEO. My boys have disproved every one of their o so sure, this is always the way it is opinions.
If your offended. I'm sorry. But I have strong feelings about your statements.
 
Top