kidkrawler
Active Member
Pics and descriptions on Pirate. Located in Spanish Fork:
http://www.pirate4x4.com/forum/misc-stuff-sale/1305177-partout-atlas-tfab-reid-torq-14bolt-etc.html
Local Prices:
- 2012 Trent Fab FJ40 4 seater chassis, motor and trans mounts installed, otherwise a bare frame. New and not messed with, it is still as received from T-Fab. 4k without FJ40 hood, or $4200 with hood.
- Brand new in box Atlas transfer case. 3.8 gears, driver drop, standard rotation, 32 spline input and heavy duty front output. 1350 flanges, with stick shifters, and TH400 adapter. $2450.
- Torq 14 bolt nodular 3rd member, Ruff Stuff Specialties 14 bolt housing 3.5" heavy tubes, drivers drop and uncut. Paid $1780, $1600.
- Reid Inner C's 3.5" brand new with new bearing races and seals, paid $680, sell for $550.
- Barely used Reid 60 knuckles, with ARP studs and nuts, new Artec ultimate arms, already drilled, paid $1225, $1000.
- Yukon Dana 60 35 spline outers, brand new, $160
- 2010 GMC LY6 engine, 6.0l, basically an LS3 with a cast block and truck intake and oil pan. Aluminum heads, complete and uncut harness with ecm and accessories. Looks clean. $1300.
- Recently rebuilt TH400, redline clutches and band, lowered 2.72 Hughes first gear set, 27 spline output shaft, no converter, I wanted a different speed, very low miles, $500, has one bolting ear cracked on it.
- Art Carr TH400 Shifter - $140.
- Reid solid kingpin bushings, $100
- 16 Ruff Stuff 1.25 heims, lefts and rights, with 3/4 stainless spacers, jam nuts and bungs. Brand new still in Dan's box. Paid $1120, $900.
- Trail Ready HD wheels, wide rings, 17", 8 lug, 4.5" backspace. Used on my last rig, were out 3-4 times, scratching on the rock rings and are dusty, $1350
- PSC 2.5 full hydro DE ram, PSC reactive load orbital, PSC filter style reservoir, 4 ram mounting clamps, extra large PSC clevis ends, 4 of Dan's 7/8" tie rod ends, tie rod DOM. All brand new, $1000.
- TMR 14 bolt shave kit, with turned down 5.13 gears, all new. $300.
http://www.pirate4x4.com/forum/misc-stuff-sale/1305177-partout-atlas-tfab-reid-torq-14bolt-etc.html
Local Prices:
- 2012 Trent Fab FJ40 4 seater chassis, motor and trans mounts installed, otherwise a bare frame. New and not messed with, it is still as received from T-Fab. 4k without FJ40 hood, or $4200 with hood.
- Brand new in box Atlas transfer case. 3.8 gears, driver drop, standard rotation, 32 spline input and heavy duty front output. 1350 flanges, with stick shifters, and TH400 adapter. $2450.
- Torq 14 bolt nodular 3rd member, Ruff Stuff Specialties 14 bolt housing 3.5" heavy tubes, drivers drop and uncut. Paid $1780, $1600.
- Reid Inner C's 3.5" brand new with new bearing races and seals, paid $680, sell for $550.
- Barely used Reid 60 knuckles, with ARP studs and nuts, new Artec ultimate arms, already drilled, paid $1225, $1000.
- Yukon Dana 60 35 spline outers, brand new, $160
- 2010 GMC LY6 engine, 6.0l, basically an LS3 with a cast block and truck intake and oil pan. Aluminum heads, complete and uncut harness with ecm and accessories. Looks clean. $1300.
- Recently rebuilt TH400, redline clutches and band, lowered 2.72 Hughes first gear set, 27 spline output shaft, no converter, I wanted a different speed, very low miles, $500, has one bolting ear cracked on it.
- Art Carr TH400 Shifter - $140.
- Reid solid kingpin bushings, $100
- 16 Ruff Stuff 1.25 heims, lefts and rights, with 3/4 stainless spacers, jam nuts and bungs. Brand new still in Dan's box. Paid $1120, $900.
- Trail Ready HD wheels, wide rings, 17", 8 lug, 4.5" backspace. Used on my last rig, were out 3-4 times, scratching on the rock rings and are dusty, $1350
- PSC 2.5 full hydro DE ram, PSC reactive load orbital, PSC filter style reservoir, 4 ram mounting clamps, extra large PSC clevis ends, 4 of Dan's 7/8" tie rod ends, tie rod DOM. All brand new, $1000.
- TMR 14 bolt shave kit, with turned down 5.13 gears, all new. $300.
Last edited:
