Can this Lock Right be fixed?

[Jay5.9L]

This came out of my D30 after the pins let go. Should I try and remove/drill out the broken pins or are the halves too damaged to be reused?

 

[waynehartwig]

Depends on how bad you bugger up the drivers getting the pins out. A new pin kit is cheap, add that with a new Zytanium cross pin and try it again. Worst case you'll have to buy a SPARTAN next, but you'll already have the Zytanium cross pin and only be out the cost of the pin kit

 

[Jay5.9L]

Well I tried to get the pins out and it wasa no go. Those pins must be pretty hard since the drill bit barely made a scratch. I maybe in the market for a new locker soon

 

[waynehartwig]

Well, the only reason they can't come out is probably because the surface/pin is buggered. So if you were to take a die grinder and dress the area, they would probably come out easy.