D60 HP front 3 link setup, housing

UFAB

UFAB

Well-Known Member
Location
Lehi Ut
Used axle assembly, few years old. 100% operational

2003 Ford F550 D60 HP narrowed to 64" WMS

3.5" x .500" axle tubes

Driver side differential
No carrier or gears, just housing

6 Lug TG Unit Bearings
-3 AN Air line adapter, -6 AN Breather bulk head
Machined Outer knuckles, both sides with steering arms and double shear setup, heims
13.3" rotors with ram 1500 calipers and brackets

Spicer ball joints
TG 2" hydro ram runs as full time or assist, currently running as full hydro
7075 T6 tie rod with 3/4 heims
ARB diff cover
Currie swaybar integrated in axle housing, includes arms

3 link setup with pan hard bar brackets CNC cut and fabricated
Setup for low CG

Complete axle housing with swaybar and steering

Optional ABS friendly plug and play, 5 and 8 lug patterns additional monies..

Current brakes will clear 17" wheel

For another $125 we can put some wilwood calipers on and OEM toyota rotors with caliper adapters so you can fit a 15" wheel

No inner or outer axle shafts included, but we have a newly recut stock inner shaft that fits, 31" long, For additional monies we can sell a set of OEM inner shafts and 4340 outers, which are in stock.

$1000

Mitch

801-719-8140



 
Last edited:
Current brakes will clear 17" wheel

For another $125 we can put some wilwood calipers on and OEM toyota rotors with caliper adapters so you can fit a 15" wheel

No inner or outer axle shafts included, but we have a newly recut stock inner shaft that fits, 31" long, For additional monies we can sell a set of OEM inner shafts and 4340 outers, which are in stock.
 
You must log in or register to reply here.
Back
Top