d60 question

[KToy]

ok how much and whow does it??

how much does it cost to get you d60 cut from passanger side to driver side.

trying to get a HP passanger side and have an axle lined up.


and who does it in the valley near slc.



and if i cant do it would anyone want to buy a 02 dodge cummins front d60

 

[James K]

ok how much and whow does it??

how much does it cost to get you d60 cut from passanger side to driver side.

trying to get a HP passanger side and have an axle lined up.


and who does it in the valley near slc.



and if i cant do it would anyone want to buy a 02 dodge cummins front d60

steve over at loveridge machine bought all of charles old equipment. but last I heard he still didn't have it set up to do anything.

might try calling over there.


and if you have 6 months to wait you might try randy over at advanced.

 

[Caleb]

I believe the boys at Rocklogoc are starting to do axle retubing. Give them a call for pricing though.

 

[KToy]

i asked RL and they said they can cut and turn the knuckles but not switch the tubes. plus they cut off about 3 inches of the width.

does mepco do it ???

 

[tv_larsen]

Mt. Logan can probably do that for you.

 

[KToy]

whats mt logans phone number and how much would it cost do ya think ?

 

[jcruiser70]

Rocky Mtn Axle does it, can't rememer what it costs though.

808-2525

 

[Caleb]

Rocky Mtn Axle does it, can't rememer what it costs though.

808-2525

thats where Charles was at, and he is no longer there...I dont know if they still do it now that all his equipment was sold.

 

[cruiseroutfit]

thats where Charles was at, and he is no longer there...I dont know if they still do it now that all his equipment was sold.

Rocky Mountain Axle was a one man gig, Charles being the one man. He is out of the business and doing something else (working for his son?)

Check with Steve @ Loveridge

 

[KToy]

got a number for steve ?

 

[cruiseroutfit]

got a number for steve ?

Got a phonebook for Loveridge?

 

[tv_larsen]

whats mt logans phone number and how much would it cost do ya think ?

No clue on price.

(435) 752-4272

 

[KToy]

got a hold of steve @ loveridge said he cant do it for 2 weeks. but the axle i was gonna buy wont work for my needs so back to the buying board for a d60 for me.

i think ima just beef up my d44 since i got good deal on it and its got an arb for 100 bux.

 

[VANDALL]

OUTER LIMIT MOTORSPORTS!!
We cant do any axle job u want just call and ask 4 PARKER.
(801)-972-2811.
1-877-OLMFAB1.
2437 S. 3270 W. West Valley, UT.


VANDALL.

 

[KToy]

sweet thanks vandall. price would be nice. now i have to find a HP D60.

the other one fell through as its too new of dodge D60

 

[VANDALL]

sweet thanks vandall. price would be nice. now i have to find a HP D60.

the other one fell through as its too new of dodge D60

No prob!! The only front dana60 I have is a '93 an older(king pin) 60, But if u r going to have it cut it will work!!

VANDALL.

 

[RamToy]

sweet thanks vandall. price would be nice. now i have to find a HP D60.

the other one fell through as its too new of dodge D60

Joe H has one. Call him. Told him you were looking.

 

[KToy]

you got a pic of it vandall.

if its a HP d60 driver side drop, how much for the axle and how much would u retube it for a passanger side drop.

you can pm me with the price if you need to.

pics would be nice to.

 

[VANDALL]

you got a pic of it vandall.

if its a HP d60 driver side drop, how much for the axle and how much would u retube it for a passanger side drop.

you can pm me with the price if you need to.

pics would be nice to.

SORRY My bad!!, Its not a high pinion Just call an ask 4 Parker on pricing?

VANDALL.

 

[mswasey]

Joe McClellan from McMillwright did a couple of D60's for me recently. He is a buddy of Charles and did a great job for me. Something like $200 to swap tubes on a 60. Give him a call at 801-355-1950. His shop is in Salt Lake.

Rocky Mountain Axle was a one man gig, Charles being the one man. He is out of the business and doing something else (working for his son?)

Check with Steve @ Loveridge