idahoyj
Well-Known Member
- Location
- Twin Falls Idaho
All are OBO. Located in Twin Falls ID 83301.
ALL SOLD
#1) Ford Dana 60 front.SOLD WAS $350 NOW $250! High pinion, later ball joint style. 4.10 gears. 69" wms. 8x170 lug pattern. Drivers side diff.
Missing long side inner and outer shafts, both calipers and rotors, one caliper bracket, tie rod end broken off of drivers side knuckle, no lock outs.
#2) Ford Dana 60 front. SOLD $600 High pinion, early ball joint style, 4.10 gears. 69" wms. 8x6.5 lug pattern.
Backing plates removed, knuckles drilled for heim joint steering.
#3) Dodge Dana 60 front.Was $400, Reduced to $300, NOW ONLY $250SOLD Low pinion, ball joint, CAD, 3.54 gears, 71.5" wms. 8x6.5 lug pattern. Drivers side diff.
#4) Dodge Dana 60 front. Was $400, Reduced to $300, NOW ONLY $250 SOLD Low pinion, ball joint, CAD, 4.10 gears, 71.5" wms. 8x6.5 lug pattern. Drivers side diff.
#5) Chevy Dana 60 front. SOLD $900 Low pinion, King Pin, DRW, 4.10 gears, 31.5 spring center, 8x6.5 pattern.
#6) Ford SuperDuty Rear $250 SOLD 4.10, disk brakes, open diff, complete.
#7) Ford / Sterling 10.25 rear $125 SOLD 4.10, drum brakes, passenger seal leaks, cover leaks, welded diff, perches for SOA on YJ, complete.
All gear ratios are taken from the axle tags. I will pull the covers and confirm ratios as needed.
Josh
208three oh ate2078
ALL SOLD
#1) Ford Dana 60 front.SOLD WAS $350 NOW $250! High pinion, later ball joint style. 4.10 gears. 69" wms. 8x170 lug pattern. Drivers side diff.
Missing long side inner and outer shafts, both calipers and rotors, one caliper bracket, tie rod end broken off of drivers side knuckle, no lock outs.
#2) Ford Dana 60 front. SOLD $600 High pinion, early ball joint style, 4.10 gears. 69" wms. 8x6.5 lug pattern.
Backing plates removed, knuckles drilled for heim joint steering.
#3) Dodge Dana 60 front.Was $400, Reduced to $300, NOW ONLY $250SOLD Low pinion, ball joint, CAD, 3.54 gears, 71.5" wms. 8x6.5 lug pattern. Drivers side diff.
#4) Dodge Dana 60 front. Was $400, Reduced to $300, NOW ONLY $250 SOLD Low pinion, ball joint, CAD, 4.10 gears, 71.5" wms. 8x6.5 lug pattern. Drivers side diff.
#5) Chevy Dana 60 front. SOLD $900 Low pinion, King Pin, DRW, 4.10 gears, 31.5 spring center, 8x6.5 pattern.
#6) Ford SuperDuty Rear $250 SOLD 4.10, disk brakes, open diff, complete.
#7) Ford / Sterling 10.25 rear $125 SOLD 4.10, drum brakes, passenger seal leaks, cover leaks, welded diff, perches for SOA on YJ, complete.
All gear ratios are taken from the axle tags. I will pull the covers and confirm ratios as needed.
Josh
208three oh ate2078
Last edited:
