Emailing me is the easiest for pics and info, etc....
Need to build some capital for a new project, and make some room
all good used pulled from stock trucks
FORD
88 kingpin 4.10 complete lock to lock all factory brackets, 1 u joint a tiny bit sloppy sold
2- 92-96 balljoint 4.10 complete lock to lock all factory brackets sold sold
1 92-96 balljoint DRW 4.10 lock to lock all factory brackets sold
Dodge
89 kingpin 3.07 Cummins rig, aka dana 61 or run a ring gear spacer and
regear to any 60 ratio, VERY CLEAN still has most of factory black paint
parted still have excellent housing and gear setup $375 plus ship
91 kingpin 4.10 clean complete good condtion
Chevy
78 kingpin 4.10 like new single wheel hubs and brakes
83 kingpin 3.73 sold
2- 81, 82 kingpin 4.56 sold sold
ANY OF THE ABOVE
$1200 OBO to dock in denver $1275 OBO dock in SLC
pricing with shipping included in these two quotes.
THESE ARE MAKE OFFER
business dock deliver for a few dollars more depending on your location
from the shipping lanes.
60 FRONT PARTS
CHEVY ( ALL prices PLUS SHIPPING)
housing $275
outer kuckles set $225
shafts inner through outers $150 either side
spindles rough rough seal area $ 50 set. one good one 3 threads need cleaned $125 set
tie rod $75
Dodge
outer knuckles set
spinles $125 set
tie rod $100
TRADES: 39 sticky krawlers, ORIs, 8274, fj80 or fj60 front axle parts, toy elocker
rough list just ask.
again EMAIL is the best
Need to build some capital for a new project, and make some room
all good used pulled from stock trucks
FORD
88 kingpin 4.10 complete lock to lock all factory brackets, 1 u joint a tiny bit sloppy sold
2- 92-96 balljoint 4.10 complete lock to lock all factory brackets sold sold
1 92-96 balljoint DRW 4.10 lock to lock all factory brackets sold
Dodge
89 kingpin 3.07 Cummins rig, aka dana 61 or run a ring gear spacer and
regear to any 60 ratio, VERY CLEAN still has most of factory black paint
parted still have excellent housing and gear setup $375 plus ship
91 kingpin 4.10 clean complete good condtion
Chevy
78 kingpin 4.10 like new single wheel hubs and brakes
83 kingpin 3.73 sold
2- 81, 82 kingpin 4.56 sold sold
ANY OF THE ABOVE
$1200 OBO to dock in denver $1275 OBO dock in SLC
pricing with shipping included in these two quotes.
THESE ARE MAKE OFFER
business dock deliver for a few dollars more depending on your location
from the shipping lanes.
60 FRONT PARTS
CHEVY ( ALL prices PLUS SHIPPING)
housing $275
outer kuckles set $225
shafts inner through outers $150 either side
spindles rough rough seal area $ 50 set. one good one 3 threads need cleaned $125 set
tie rod $75
Dodge
outer knuckles set
spinles $125 set
tie rod $100
TRADES: 39 sticky krawlers, ORIs, 8274, fj80 or fj60 front axle parts, toy elocker
rough list just ask.
again EMAIL is the best
Last edited:
