• RME Gear & Apparel

Driveshaft Q's

J

JPTHING

Registered User
So what truck do I look for to find 1410 driveshafts, and what truck do I look for to find dana 60 1410 axle yokes, 14 bolt axle yokes, and NP205 yokes? I have been building my own DS's but I like to use existing shaft parts. Does anyone make a CV for 1410 Joints?
 
Jinx

Jinx

when in doubt, upgrade!
Location
So Jordan, Utah
some of the 14 bolts have a 1350 yoke, but I am not sure if any have a stock 1410 yoke...

Sorry not much help, I just ordered my atlas with the 1410 yokes... Advance Adapters has the ones you are looking for...
 
Kiel

Kiel

Formerly WJ ZUK
Ford superduty trucks are where I got mine. I don't think they made a stock 14 bolt 1410- jess at high angle sells them though. I went through all the paces to make mine, hit snags when I got to tubing. Nothing the right diameter. And the driveshaft shops only go up to .156 wall. Plus the tubing is pretty expensive.
 
L

LT.

Well-Known Member
Location
Los Alamos, New Mexico
From what I know about the 14 bolt full floaters you will not find one with a 1410 U-joint. 1350 is what you are going to find. This is not to say that you cannot purchase a 1410 yoke for the 14 bolt it is just that to the best of my knowledge they never came that way.

LT.
 
DToy

DToy

Registered User
Location
Lehi
My rear Dana 70HD came with a 1410 yoke on it...I ended up selling it on eBay because I replaced it with a Toyota Flange. My D70 was from an '89 Chevy V3500 1-ton. Beauty of these yokes if you can find them is that they fit a D60 or D70.
 
M

Meat_

Banned
Location
Lehi
I'm pretty sure that my '81 Cab and Chassis GMC has a 1410 yoke on it's 14 bolt. Not positive though.

Since the cool guys are taking new strapped 1410 yokes and machining them to use U bolts, I'm going to go out on a limb and say that they came on stock trucks. (the strap version)
 
Kiel

Kiel

Formerly WJ ZUK
Meat_ said:
I'm pretty sure that my '81 Cab and Chassis GMC has a 1410 yoke on it's 14 bolt. Not positive though.

Since the cool guys are taking new strapped 1410 yokes and machining them to use U bolts, I'm going to go out on a limb and say that they came on stock trucks. (the strap version)
Click to expand...

Spicer discontinued the u bolt style:rolleyes: So know they drill out the straps. 1410 on dana 70's are pretty common
 
You must log in or register to reply here.
Top