Thought I would post some pics of my latest mods
Trying to build a bullet proof d300
32 spline rear ouput
And the less common 32 spline front output
side by side
The front shaft is novaks, they had been telling me it would be out in 6 weeks for well over a year, but I finally got it The qualtiy looks good,but time will tell only thing I noted about it is that it is missing what I can olny assume would be oiling journals and that it uses a snap ring where the original did not
The rear shaft is a tera, came with decent instructions and all of the seals,shims, and bearings needed. Only complaint is that there was some surface rust on some of the parts (speedo gear spacers and the shafts itself). Only major diff is that the speedo gear section of the shaft is straight cut and has a plastic worm gear that slips over it to actuate the speedo
Trying to build a bullet proof d300
32 spline rear ouput
And the less common 32 spline front output
side by side
The front shaft is novaks, they had been telling me it would be out in 6 weeks for well over a year, but I finally got it
The qualtiy looks good,but time will tell only thing I noted about it is that it is missing what I can olny assume would be oiling journals and that it uses a snap ring where the original did not
The rear shaft is a tera, came with decent instructions and all of the seals,shims, and bearings needed. Only complaint is that there was some surface rust on some of the parts (speedo gear spacers and the shafts itself). Only major diff is that the speedo gear section of the shaft is straight cut and has a plastic worm gear that slips over it to actuate the speedo
