Fuel injection up grade

[72Bronco]

Here is my problem, I have 72 Bronco with a 351W that is of course carburated, and it works good but not good enough. I bought a complete wiring harness including a computer and intake manifold from a fuel injected 1991 F-250 with a 351W. But I dont know where to start, if someone out there has done this, I am happy with any information I can get. Or if someone knows of a good shop with good rates please let me know. Thanks, 72Bronco.

 

[yellowbronco]

Here is my problem, I have 72 Bronco with a 351W that is of course carburated, and it works good but not good enough. I bought a complete wiring harness including a computer and intake manifold from a fuel injected 1991 F-250 with a 351W. But I dont know where to start, if someone out there has done this, I am happy with any information I can get. Or if someone knows of a good shop with good rates please let me know. Thanks, 72Bronco.

A fuel injected Windsor will be sweet When I did my swap(my 72 Bronc ) I just swapped the whole engine, which I'm sure is easier. But I do know if you just dive in and get started things just start to make sense...sometimes You might try posting at classicbroncos.com, lots of good EB info. Keep me posted, fuel injected Broncos rock!!!

 

[Milner]

Check www.fordfuelinjection.com
There is a link on there to a series of 5 articles from Bronco Driver magizine.
The truck injection is very tall!! You will need a body lift and a hood bubble, at least.

 

[SnwMnkys]

It may be a little dificult, because all the swaps that people do are based off the Mustang intakes and Wiring. So all the wiring diagrams are for the Mustang 5.0 Harness. There may be a couple people who have done it over on www.classicbroncos.com

Im converting my 351W in my 69 Bronco to Fuel injection and there choices are kind of limited compared to the 5.0. I felt this was the best way, just buying some of the peices from the aftermarket and the rest from FMS.