• RME Gear & Apparel

Good "Shakedown" trail?

dzeyer

dzeyer

Active Member
Location
Pleasant Grove
My rig went thru a little suspension face lift, and I'm lookin for a trail close to Provo that will let me put my Disco thru it's paces and see what needs attention now. I'm new to the area, so I really don't have any idea what is where. So any advice would be great. Here's what I have:

99' Land Rover D2
bout 6-7" lift
37" Pitts
Rear Detroit
Front TrueTrac
HD Axles
etc.

So, something with a little difficulty would be nice on flexing it out etc. Not looking to do an all day trail, just get some measurements, pics ect.

Thanks for the help,
-Aaron
 
dzeyer

dzeyer

Active Member
Location
Pleasant Grove
"The mall?"
Ha! You're a funny guy! I'm gonna tell all my friends what a funny guy you are! Unless your a gal... then that's not so funny.
 
Kiel

Kiel

Formerly WJ ZUK
I find little moab is the best for that. That way if something happens you can get a tow rig or wrecker in there pretty easily
 
ChestonScout

ChestonScout

opinions are like Jeeps..
Location
Clinton, Ut
Did I see your Rover on a trailer yesterday heading south bound I 15 in Lehi?


Looks sweet if thats yours! Probably not to many Rovers around on Pitbulls


I went to Little Moab for the first time a couple weeks ago. It is awesome! If my Scout was running and my tow rig wasnt in the shop......I would meet you there.


Good luck!
 
Last edited:
dzeyer

dzeyer

Active Member
Location
Pleasant Grove
Yup, that was me with Lil Landy. Corey brought it back down from Rigby on Thursday, so I had to take it out and see what I needed to cut or move to fit/flex with those Pitts. I would love to see your scout in action! The pics from Tough Truck were sick.
 
ChestonScout

ChestonScout

opinions are like Jeeps..
Location
Clinton, Ut
I tore the top end of the motor down saturday......everything looks good. Im taking the heads to the shop today to get them checked. If they are good....I should have a new motor in in a week or 2. Ive been wanting to wheel so bad my teeth hurt.

Hopefully I can make a trip out to little Moab when its fixed.

Did you make it out this weekend?
 
dzeyer

dzeyer

Active Member
Location
Pleasant Grove
Yup, was there bout 2 hrs Saturday morning. I couldn't do anything too difficult... had issues with the front bumper clearance, rear drive shaft binding, and I need to retain the rear springs (switching from watts linkage to panhard freed up a lot of flex). After a few adjustments I should be ready for some good lines.

Let me know when you head down.
 
You must log in or register to reply here.
Top