Home built trailer

toys4rocks

I didn't mean to do that!
Location
Lehi
How many of you have built your own trailer for your crawler? Any thing you would add or remove knowing what you now know? Anything to watch out for. I have built a few trailers, but nothing totally customized.
 
To haul the crawler, or to pull behind it?

Here's my little offroad trailer, it may not apply to what you're asking though. :)

 
I've built two car/Jeep haulers. The first one I started with the frame and axles of a rolled travel trailer. It was okay, but the axles were really the only thing worth using. The frame is very thin wall tube and covered in some nasty coating.

The second trailer I built from scratch. 14'X 82" wide deck over axle. I wish I would have held on to this one, but I would not make it deck over the next time as it added some weight. It weighed 1850 lbs.

D9872038-CEFA-4563-B6A3-F3FB618A1FDE.jpeg261634F4-928F-4674-8F2C-345D12046F91.jpeg26AEF356-6EFC-4A35-90A7-7469DC55422C.jpeg80919E04-812A-4625-B011-A7C95BB0AFED.jpeg
 
For the next trailer it will be pretty similar to the pics above, just not deck over. Probably a wood deck, just because I think it would be easier to paint all sides of the steel without the deck installed.

I've considered building one like this pic below, but I'm not sure I would love a dedicated trailer to store that can only haul the Jeep. Using it as a utility trailer would fit better in my fleet.

ED390CB5-AB6D-42B7-9661-9413D96CAB8C.jpeg67E0E7C9-D843-4979-9641-D37A79DD5A3C.jpeg
 
I think that's the problem I am having, I would like a dedicated trailer, but I know better. Also, the single axle is intriguing to say the least, but my new to me crawler is going to be pretty heavy.
 



I'd kind of like to apply that same deck concept to my deckover gooseneck. See if could lose about 1500 lbs. Probably put back in about as much as I'd take off? (the deck wood is HEAVY though--might just pull out the center strips and lose 400-500 lbs over 28'? ) Can I convert the deck over to a car hauler type? I think I'd like the Jeeps more in the aerodynamic hole that the Stuper Duty created already rather than having a full grille/windshield sitting just at the top of the goose neck part.
 
Last edited:
Back
Top