I have 1990 F-350 what type front Dana 60 does it have?

[Paul R]

The truck is a 1990 F-350 4x4. It is a dually with a Diesel motor 7.3 I believe. I think some one was telling me that because it is a dually it has something different with the front hubs?

 

[Kiel]

it's a hp kingpin dana 60 with dually hubs/rotors.

 

[Paul R]

What is the disadvantage of dually hubs/rotors?

 

[I Lean]

Could be balljoint instead of kingpin, I've seen both in that year. (my father-in-law has a '90 with balljoints)

It's a naturally aspriated diesel, that can be helped greatly by adding an aftermarket turbo if you want to go that route.

 

[Rot Box]

7.3L N/A or TD Navistars =
Starting a 7.3L N/A or TD Navistar on a cold morning without being plugged in = :sick:

Kingpin or not you can't go wrong with what you've got. Just be thankfull that Ford never put the TTB under it

 

[CrawlerCraig]

I bet it is ball joint style.........mine is out of a 90 F-350 and it is ball joint.

......the only problem i ran into was trying to do High steering set up......You don't have the ability of buying the arms that replace the king pin cover.....I had to build my own.........drill and tap the knuckle but other than that I have not had a problem with it........it is worth just as much $$$ as a king pin. Since it is High Pinion they are wanted badly!!

 

[SAMI]

I bet it is ball joint style.........mine is out of a 90 F-350 and it is ball joint.

......the only problem i ran into was trying to do High steering set up......You don't have the ability of buying the arms that replace the king pin cover.....I had to build my own.........drill and tap the knuckle but other than that I have not had a problem with it........it is worth just as much $$$ as a king pin. Since it is High Pinion they are wanted badly!!

the custom work will be no problem

-Jason