Identify these leaf springs

[custom]

I pulled these springs from a 96 toyota tacoma. It had been SAS'd. I know the shop that had done it but didn't have any specs on it as it was atleast 5 years ago they had done this. If they work on what i need them too then i will use them. If not then they will be up for sale. The taco had RS 44044E front springs. 2.5" lift with a grand wagoneer front axle sprung over. The rear lift was these springs and a 2" block. He was clearing 37" MTR's. When i talked to the old owner of the shop he said this was a kit that some guy online was making and selling. He is unsure if the rear springs were with that kit or if they had purchased them seperately. I have looked around and havn't been able to nail down what springs these are and how much lift they are as well

The P# is 48210-89RN2-3

these are all of the pics that i have for this truck

 

[Greg]

It looks like a 63" Chevy leaf.

 

[Chevycrew]

I believe its still using the stock taco spring hangers.

 

[custom]

steve....this was done at the shop you used to work at after you left. sparky worked on it.

oh and the rear springs measure 52" long

 

[str8axleguy]

They look like a set of suburban 6 inch lift springs from the rear. I know where there is a set I will check the part number on the ones I have seen. The ones I am thinking of came from tuff country not many companies make a 6 inch rear spring for a sub, they are different then the pickups.

 

[Chevycrew]

I dont think there is enough lift there for a 6" rear 52" spring. But I may be wrong...

 

[custom]

i think they are too narrow to be a fullsize spring. I will confirm it tonight when i get home

 

[chans]

They are probably Wheeler springs with no lift or something similar being they are a 4 leaf since the 1 1/2" lift springs are 5 leaf and to get 2 or 3" you would need 7 or 8 leafs. They would work on a 95.5 - 97 Taco and would be too short for the newer models.
http://www.wheelersoffroad.com/tacoleafs.htm
They are made by Alcan now but use to be made overseas. They are definately stock length and width for a 96 Taco. Also is the front axle and springs still in the junk yard? If so can you PM me the info since that would make a nice start for mine.

 

[cruiseroutfit]

Guaranteed some sort of Toyota specific aftermarket springs, the prefix 48210 is used by Toyota, the last part is obviously and aftermarket number. Wheelers, All-Pro, etc would be my guess.