is it a good 60
- Thread starter lewis
- Start date
Milner
formerly "rckcrlr"
- Location
- Hiding behind a camera
If it is a 60 it will be 35 spline inner shafts. BUT make sure to look at it first! I am sure someone will say I am crazy, but there were some F350's of that vintage that came from the factory with a TTB 50
Another Ford fart....If it is the 60 that is a good price around here.
Nate R
It's derby season!
- Location
- West Jordan, UT
If it is a 60 it will be 35 spline inner shafts. BUT make sure to look at it first! I am sure someone will say I am crazy, but there were some F350's of that vintage that came from the factory with a TTB 50
If it is the 60 that is a good price around here.
Your right on the TTB but I think it was in the early 80's
rondo
rondo
- Location
- Boise Idaho
I think the 80-86 fords were TTBs. Someone...?
Milner
formerly "rckcrlr"
- Location
- Hiding behind a camera
All f-150 and 250's were ttb thru 80-97. All but a few 350's were solid axle....I just can't remember the year of 350 ttb....Getting old
Nate R
It's derby season!
- Location
- West Jordan, UT
That's the way all front D60's came after 1978.
kidkrawler
Active Member
On the right side of the pumpkin on the lower corner there is usually a 60 cast into them, although I have seen it without it before. Also on the drivers side tube right next to the pumpkin on the front of the tube will be 6 digits, sometimes buried under crap and rust. It will likely be on of these:
610220
610255
610305
And any of these are 35 spline inner, 30 spline outer hp 60's
610220
610255
610305
And any of these are 35 spline inner, 30 spline outer hp 60's