Jakes Full Width Runner

[NOTATOY]

Jake (BACKYARD CUSTOMZ), S.Ogden

1988 4RUNNER

UNDER THE HOOD IS A 3.0 V-6, CUSTOM BUILT INTAKE, ELECTRIC FAN, CHEVY BRAKE MASTER CYLINDER, CUSTOM INNER FENDERS FOR MORE CLEARANCE, FLOWMASTER TO UNLEASH THE POWER OF THE 3.0

5 SPEED MANUAL TRANS

DUAL 23 SPLINE GEAR DRIVE CASES
ADVANCED ADAPTER FROM TRANS, TG DOULBLER, 4.7 GEARS IN REAR CASE
TG HD CROSSMEMBER, SKY'S TCASE E-BRAKE

CUSTOM FRONT CANTILEVERED 3 LINK, SUMMIT FLEX JOINTS, FIRESTONE 2600 AIRBAGS, ARMS ARE 1.75" .120 WALL DOM SLEEVED WITH 1.5" DOM .120 WALL

REAR ALCAN CUSTOM BUILT LEAF SPRINGS WITH ORBIT EYE SHACKLE MOUNTS, CUSTOM BUILT TORQ ARM

FRONT AXLE IS A HD DANA 44 WITH YUKON EXTREME CHROMOLY SHAFTS AND YUKON SUPERJOINT UJOINTS, YUKON 5:38 GEARS, SPOOLED, BALLISTIC HIEM JOINT FRONT STEERING KIT, ASSISTED BY A TG HYDRO ASSIST RAM POWERED BY A ROCK ASSAULT HIGH PRESSURE PUMP

REAR AXLE IS A 16 FIN 14 BOLT, DISC BRAKE CONVERSION, YUKON 5:38, WITH A DETROIT LOCKER

CUSTOM BUILT BUMPER WITH SMITTYBUILT 8K WINCH, CUSTOM CAGE, WITH HARNESSES FOR REAR SEATS, SLIDERS, BODY WAS BOBBED ABOUT 14", STRETCHED TO 116" WB

YOU CAN'T LOSE WITH 42'S

 

[Gravy]

nice rig, looked good at the DATC show

 

[193kyle]

UNLEASH THE POWER OF THE 3.0

Hahaha I almost fell out of my chair!!

The green truck in the background is pretty sweet!

 

[NOTATOY]

nice rig, looked good at the DATC show

THANKS YOURS LOOKED GOOD AT THE SHOW TOO, TILL LATER. MY DAD SAID HE PASSED IT IN SLC ON A TRAILER COMING BACK FROM MINI MOAB. WHAT YOU DOIN WITH IT NOW??

KYLE THE GREEN TRUCK WOULD HAVE LOOKED BETTER WITH PINK WHEELS.
I THOUGHT YOU'D LIKE THE POWER COMMENT.

 

[SLC97SR5]

Looks good Jake!

 

[NOTATOY]

Thanks!

 

[NOTATOY]

Picture from datc ramp

 

[Taco4life]

Nice 4runner is it street legal? Does a top fit on it with that roll cage design?

 

[NOTATOY]

nice 4runner is it street legal? Does a top fit on it with that roll cage design?

no not street legal at all, but i have chopped the top down and we built the cage to still fit inside of the shell.

 

[choptopbII]

looks great saw it at the datc. looks like it works well too.

 

[ricsrx]

Jake, great to see you at DATC, very nice runner.

 

[Jeeperman]

I freakin love this thing

 

[Goose]

sweet yoat!! looks pretty stout!
its always good to see another yota diehard

 

[solidfrontaxle]

That is a GREAT looking truck!

 

[NOTATOY]

Thanks Guys, Goose I love your truck too.

 

[ChestonScout]

did you get those 42s from me?



Sweet looking rig! 4 runners have been growning on me a lot lately

 

[bruzer]

There was mention of a custom intake on your 3.slow in the first post. I would like to know more about it if you dont mind.

 

[NOTATOY]

Cheston I didn't get the 42's from you, they came from my buddy in West Haven. The intake I had to custom build because I'm running trailer inner fenders for more clearance and a 1 ton chevy master cylinder. I bought mandrel bent exhaust tubing from Summit and cut and sectioned together. I used Spectra intake couplings from Checkers, and a K&N cone filter and mass air flow adapter. let me know and I can send some pics if you want bruzer

 

[NOTATOY]

a couple pics from mini moab

I guess it's time for more trimming, I have to cut my bumper and fenders even more. It is pretty funny to see chunks of tire flying 10 feet in the air when your tire is completely stuffed.

 

[LT.]

Cool looking ride. Post up some more pictures.

LT.