• RME Gear & Apparel

For Sale Lincoln Mark VIII fan 80.00

Navigator

Navigator

Active Member
Location
Provo
I have been watching this for a while but I never seem to be going that way, if you are ever down in the Provo, Springville, area I would take one off your hands.
 
Kiel

Kiel

Formerly WJ ZUK
I'll let you know if I do, but to be honest I hate even going to sandy these days. I haven't been past 7200 S. in almost a year
 
spaggyroe

spaggyroe

Man Flu Survivor
Location
Lehi
mbryson said:
These are significantly deeper (1" is significant on my setup :) ) than my Taurus fan. I have one of these available if someone is looking
Click to expand...

I might be. I'll need to take some measurements tonight. Is there any chance you can tell me the dimension from the front of the fan blades to the back of the motor? I'd be (trying to) incorporate this into an existing fabricated shroud.
 
mbryson

mbryson

.......a few dollars more
Supporting Member
Location
Bountiful, land of rocks
spaggyroe said:
I might be. I'll need to take some measurements tonight. Is there any chance you can tell me the dimension from the front of the fan blades to the back of the motor? I'd be (trying to) incorporate this into an existing fabricated shroud.
Click to expand...


I'll get those for you tonight. I'd be shocked if this doesn't cool that 5.0 right off?



dimensions of mark VIII fan

I'm in the market for a new electric fan for my 68 Camaro, since my black magic does not seem to be cutting it lately. I saw all the hype about the mark VIII fans, and have decided that it would work great with one of those dc controllers. I just want to make sure that it will fit my radiator...
www.pro-touring.com
 
spaggyroe

spaggyroe

Man Flu Survivor
Location
Lehi
mbryson said:
I'll get those for you tonight. I'd be shocked if this doesn't cool that 5.0 right off?



dimensions of mark VIII fan

I'm in the market for a new electric fan for my 68 Camaro, since my black magic does not seem to be cutting it lately. I saw all the hype about the mark VIII fans, and have decided that it would work great with one of those dc controllers. I just want to make sure that it will fit my radiator...
www.pro-touring.com
Click to expand...

Thanks Marc. Most of the info I've found online shows the thickness of the complete assembly with shroud (at 5.75" of so). That is a no-go for me, but the first hyperlink shows some additional info I've found too, which is "4 1/4 thick when trimed to thinest size". That sounds promising. As I'm not going to be able to use the original shroud, I was hoping to confirm the actual measurement from the fan blade itself, to the back of the motor.

I have a taurus fan in there now, and would say it's barely enough. More air would be more gooder.
 
You must log in or register to reply here.
Top