line lock????

[chadschoon]

go to polyperformance.com they have one for like 30 bucks. I'm thinking about that one

 

[greenjeep]

go to polyperformance.com they have one for like 30 bucks. I'm thinking about that one

The Jamar unit? I have a friend with a buggy who said his Jamar lock died really soon.

Any ideas on getting the ball valve thing?

 

[chadschoon]

ya that's the one I was thinking about. But if they die I won't waste my time

 

[RockMonkey]

Any ideas on getting the ball valve thing?

http://www.houseofhose.com/product-request.php

 

[greenjeep]

http://www.houseofhose.com/product-request.php

Thanks, I filled out the request, hopefully they respond.

 

[chadschoon]

they already responded to me. He said they have 1/4" npt but not 1/8" so you would have to reduce down. He said they were about 42$

 

[greenjeep]

Cool, any idea where to get the adapters then?

 

[RockMonkey]

Cool, any idea where to get the adapters then?

Evco...

You'll need to find out if the ball valve is 1/4 NPT male or female, and get the proper adapter from 1/4" NPT to your brake line flared fitting. You may need to adapt from 1/4" to 1/8" NPT first, but the fitting may be available to do it all in one step.

 

[greenjeep]

It's HERE too. Is this what the Evco ones look like?

 

[chadschoon]

thats the one I just ordered. Evco didnt have any in stock so I'll try this one

 

[greenjeep]

Ordered. Hope it works out ok.

 

[chadschoon]

just need to get some lines from evco, and clean it up a bit and its ready to go

 

[lostsamurai]

i got mine from lowrangeoffroad.com out of provo utah 35 bucks for the jamal and 45 for the electric type then i got adapters from checker and ran hard lines to them they sit on my firewall and have hard lines from the master cylinder i just have one for the rear and front axle since im lincoln locked individual cutters would be a waste of timethe rear burn turn works great but untill i get my rear disconnect the front burn turns dont work very well