SUPERFLY
CaptainRob
- Location
- sugar house
oh hey guys! i havent been on here for a while, but i figure i will start a build thread about my new project.
the goal is a super simple basic cheap toyota and compete in the mod stock delta competitions as well as a few werocks and a possible BOR race.
ive learned a bunch from my last 2 builds, my 4runner, and my 91 ifs truck. From my 4runner i learned that expensive parts like hi pinion elockers, spendy tcase parts and front axle parts are cool.. but still break. i learned that a big powerful motor is awesome! but doesnt help a whole lot for technical rock crawling. simplicity and reliability is more useful. i learned from my ifs truck that a simple, low, stable, ifs, truck with just dual cases, and welded diffs, on small tires can actuall keep up with big build rigs suprisingly well, expect to break a lot of parts.. lifetime warrenty at checker is your best friend!
this build im going with a bit of both.
front axle:
arp knuckle studs
dirty thirty axle shafts
welded 4cly third
rear axle
welded 4cly third
steering:
high steer
hydro assist
motor:
stock 22re
tranny:
w56
tcase:
4.7 gears
maybe also dual case? i have an adapter but not sure if i need to?
rear driveline disconect
rad design or possibly my own make of triple stick
tires
35(what ever i can get)
17 inch bead locks
6 point roll cage
corbou seats
tube doors
low profile bumpers and sliders
window nets
fuel cell
front and rear suck down winches
i bought the donor truck off a buddy. it is a standerd cab 2nd gen truck. it already has the 4.7 gears in the tcase, high steer, some suspension, and is already bobbed but as most previously built trucks go, its in need of some tlc, i will post pics soon
so far LOW RANGE OFF ROAD has been awesome to me! they sponsored the front axle parts. i highly recomend them, the guys down there, as many of you know are super cool and great to work with! I'm also looking for more sponsors, and as always I can promise you, I will make sure your stickers and product are seen!
the goal is a super simple basic cheap toyota and compete in the mod stock delta competitions as well as a few werocks and a possible BOR race.
ive learned a bunch from my last 2 builds, my 4runner, and my 91 ifs truck. From my 4runner i learned that expensive parts like hi pinion elockers, spendy tcase parts and front axle parts are cool.. but still break. i learned that a big powerful motor is awesome! but doesnt help a whole lot for technical rock crawling. simplicity and reliability is more useful. i learned from my ifs truck that a simple, low, stable, ifs, truck with just dual cases, and welded diffs, on small tires can actuall keep up with big build rigs suprisingly well, expect to break a lot of parts.. lifetime warrenty at checker is your best friend!
this build im going with a bit of both.
front axle:
arp knuckle studs
dirty thirty axle shafts
welded 4cly third
rear axle
welded 4cly third
steering:
high steer
hydro assist
motor:
stock 22re
tranny:
w56
tcase:
4.7 gears
maybe also dual case? i have an adapter but not sure if i need to?
rear driveline disconect
rad design or possibly my own make of triple stick
tires
35(what ever i can get)
17 inch bead locks
6 point roll cage
corbou seats
tube doors
low profile bumpers and sliders
window nets
fuel cell
front and rear suck down winches
i bought the donor truck off a buddy. it is a standerd cab 2nd gen truck. it already has the 4.7 gears in the tcase, high steer, some suspension, and is already bobbed but as most previously built trucks go, its in need of some tlc, i will post pics soon
so far LOW RANGE OFF ROAD has been awesome to me! they sponsored the front axle parts. i highly recomend them, the guys down there, as many of you know are super cool and great to work with! I'm also looking for more sponsors, and as always I can promise you, I will make sure your stickers and product are seen!
Last edited:
