Motor Mount Lift on a TJ

[gksspot]

Looking to put on my motor mount spacer lift on my TJ. I wanted to see if if anyone that has the appropriate tools might want to dontate a hour or so of their time helping me put it on... Im good for a couple pizzas
I have read up on it and have instructions. I dont really have the right tools (college kid). Experience doing this isnt needed really... Im sure it shouldnt be too bad to do.

This is what it states is NECCESSARY:

Floor jack (Do not have)
2X4 piece of wood (at least 6 inches long- shouldnt be a problem finding)
Sockets with extensions (I have)
Loctite (I have)
Torque Wrench (also have-its a huge one, hopefully wont need a small one)
Drill and 9/16 bit (Do not have-but could borrow one from my friend)

Then it states that the following would be of great help:

Additional floor jack (Don't have)
Large Pry Bar (Don't have)
Hi Lift Jack (I do have)
additional wood blocks (could get)
Phillips and flathead screwdrivers (Do have)
One or two people to help (Dont have )

 

[gksspot]

bump.................................

 

[38inchtj]

i did the motormount lift on mine pretty much by myself i used a floor jack socket wrenches and a small peice of wood i cant remember if i needed anythig else to do mine i think it took 30 minutes pretty easy

 

[gksspot]

i did the motormount lift on mine pretty much by myself i used a floor jack socket wrenches and a small peice of wood i cant remember if i needed anythig else to do mine i think it took 30 minutes pretty easy

Maybe I will see if I can borrow a floor jack from a neighbor or church leader. You have a spacer or a taller motor mount?

 

[38inchtj]

i have the M.O.R.E 1 inch lifted motor mounts they were easy