tv_larsen
Well-Known Member
- Location
- Logan, Utah
This is my car hauler trailer. I thought some might be interested.
A couple years ago I sold my 7x16 7k trailer and bought this 8.5x20 10k trailer with drive over fenders from Trailers Plus in Ogden. For the most part I really like the trailer, especially the extra width and length.
First I added a Fastway Flip foot to the tongue jack, this makes the factory jack tolerable to use. Next I added a tool box to the tongue and mounted a Warn M5000 winch using a Badlands universal winch plate and a custom frame inside the box. I also installed a marine battery box with a deep cycle battery to power the winch. I mounted the winch as high as I could inside the box, then I had to raise the box about 2" so the winch roller fairlead would clear the trailer deck.
Finally, the trailer came with a spare, and I had an extra tire, so I fabbed up two spare tire mount using some Barnes 4wd tire mount plates and mounted them to the front of the trailer.
I still plan to add a permanently mounted Battery Tender inside the box with a 110V panel mount plug in the side of the box to make charging from shore power fast and easy. I also plan to add some weld on D-rings.
A couple years ago I sold my 7x16 7k trailer and bought this 8.5x20 10k trailer with drive over fenders from Trailers Plus in Ogden. For the most part I really like the trailer, especially the extra width and length.
First I added a Fastway Flip foot to the tongue jack, this makes the factory jack tolerable to use. Next I added a tool box to the tongue and mounted a Warn M5000 winch using a Badlands universal winch plate and a custom frame inside the box. I also installed a marine battery box with a deep cycle battery to power the winch. I mounted the winch as high as I could inside the box, then I had to raise the box about 2" so the winch roller fairlead would clear the trailer deck.
Finally, the trailer came with a spare, and I had an extra tire, so I fabbed up two spare tire mount using some Barnes 4wd tire mount plates and mounted them to the front of the trailer.
I still plan to add a permanently mounted Battery Tender inside the box with a 110V panel mount plug in the side of the box to make charging from shore power fast and easy. I also plan to add some weld on D-rings.