my front 4 link numbers

[zukijames]

its a really tight fit this is about the best i can fit

rough estimate on weight and cg height

anyone see anything horribly wrong? I worry that thats not enough triangulation to keep the axle under the rig..also not much vertical separation

 

[Gravy]

Am I reading it right?
3.5" at the frame and 8" at the axle?

 

[jinxspot]

Real quick tell me what variables X, Y, Z are?

 

[zukijames]

Am I reading it right?
3.5" at the frame and 8" at the axle?

what are you saying is 3.5 at frame and 8 at axle?

the only 3.5 i see on there is showing that the lower link mount on the frame is 3.5 inches higher than the lower link mount on axle..

 

[Gravy]

Am I reading it right?
3.5" at the frame and 8" at the axle?

I'm asking if that is the vertical seperation

 

[zukijames]

thats what i thought jsut wasnt sure axle has 8 and the frame only has 3.5 to 6.5 depending on what hole i put it in.. i will probably run it with 5 inches that puts the upper link flat..

thanks for taking time to look at this you've been helpful on pretty much every stupid question i have posted on here ! so thanks !