New BFG 285/75/16 KM2's. Set of 4 + a spare. Possible trades.

NYCEGUY01

NYCEGUY01

Well-Known Member
Location
Willard, UT
Almost new. 1000 miles on them. E load range.
I put the stock size back on my truck for towing.

4 285/75/16 and 1 255/85/16 KM for the spare. ( 255 is skinnier but same heighth ) 40%-50% tread on spare.

$277.77 + tax each on Discount tire direct for the 285's.

$800 for all 5.

Possible trade for an upgraded turbo for a 12v Cummins. ( HTT or II )

An aftermarket intercooler for a 2nd gen Dodge.

A nice 8' bed with a 5th wheel hitch for a 94-02 Dodge truck. A gooseneck may also work.
Also need bumper and tail lights etc...
Will be removing my flatbed.

If you have a green bed that I wouldnt have to paint I would consider throwing in my steel 8' flatbed with a GN hitch you could either use or sell.

Would take a bed without a hitch as half trade then just go get my own hitch.

A disc brake rear Dana 80 from a Dodge with 3.54 gears

Could also use a flatbed trailer. Older and beat up is fine as long as it goes down the road. Needs to be able to haul 10k min. Could also include some of the other things I have listed to help even things up a bit. Tounge pull or GN.

Located in Ogden.
PM with questions or for # to call etc .....
 
Last edited:
Sorry, Id prefer not to break up the set.
The 255 for the spare works out great for the full size truck guys.
Its the correct height but because its narrow it will fit in the factory spare location under the bed and not hang down etc...
 
Free bump for a question? Did you have the 255 in the spare location on your dodge? Also I have a 285/75/16 BFG A/T with 50%+ tread That I would love to swap for that 255 if the new buyer wanted to have all the same size.
 
Yes on the Dodge. I have also done this same size as the spare on my 96 Chevy.
It works out real well with bieng able to keep the spare underneath instead of in the bed.
 
You must log in or register to reply here.
Back
Top