Utahcryogenics
Formerly "Beerman"
- Location
- Murray
Sorry if this is the wrong section to be doing this in, if so MOD please move it.
Hey, this is Jer from SLC, aka Beerman.
I heard about this place from a good frined named Keith L from Durango Colorado.
Funny, a guy from CO. tells a SLC guy about a Utah forum!! LOL
Well here is my long list of boring data:
Ride: 96 Ford Bronco, 351W/E4OD/BW1356
Stuff & Stuff:
I am in the process of completing a straight axle swap to a Dana 44HD from a 1978 F250 3/4 ton pickup.
Good axle and has 1/2" thick tubes (Same as 60's) so i should have pretty good luck with it. (If I ever strike it rich I will use Warn shafts & CTM's then it should be pretty bullet proof).
I just bought 4.88 Yukon gears for it today off ebay.
It will be a leaf sprung swap, and if anyone knows Keith L you know why I am swapping into leafs.
I will be using 15x8 Steelies with 37x12.5x15 MTR's. I am using my own paint design on the rims. Probably a hammered gray/silver mix coated in zinc.
Powertrax No slip in rear (Or Aussie still deciding)
Superior axle shafts in 8.8
ARB or OX in the front (When I win the lottery)
Like I said it is all in teh works right now.
If you want to see more pics, or see my full size pig then go to my superford page here:
My Superford page
OK, now on to my first question, does anyone on this forum live in SLC that can install gears?
Please PM me if you know, or if you are interested so we can chat.
Thank you.
Hey, this is Jer from SLC, aka Beerman.
I heard about this place from a good frined named Keith L from Durango Colorado.
Funny, a guy from CO. tells a SLC guy about a Utah forum!! LOL
Well here is my long list of boring data:
Ride: 96 Ford Bronco, 351W/E4OD/BW1356
Stuff & Stuff:
I am in the process of completing a straight axle swap to a Dana 44HD from a 1978 F250 3/4 ton pickup.
Good axle and has 1/2" thick tubes (Same as 60's) so i should have pretty good luck with it. (If I ever strike it rich I will use Warn shafts & CTM's then it should be pretty bullet proof).
I just bought 4.88 Yukon gears for it today off ebay.
It will be a leaf sprung swap, and if anyone knows Keith L you know why I am swapping into leafs.
I will be using 15x8 Steelies with 37x12.5x15 MTR's. I am using my own paint design on the rims. Probably a hammered gray/silver mix coated in zinc.
Powertrax No slip in rear (Or Aussie still deciding)
Superior axle shafts in 8.8
ARB or OX in the front (When I win the lottery)
Like I said it is all in teh works right now.
If you want to see more pics, or see my full size pig then go to my superford page here:
My Superford page
OK, now on to my first question, does anyone on this forum live in SLC that can install gears?
Please PM me if you know, or if you are interested so we can chat.
Thank you.