Nitro Excalibur U-joints
- Thread starter Rbknslyr
- Start date
Tacoma
Et incurventur ante non
- Location
- far enough away
Didn't they come with either a.grease or b.instructions?? Million-dollar joints should have come with one or the other.....
Spork
Tin Foil Hat Equipped
- Location
- Saratoga Springs, UT
The old farmer in me says use a good moly grease.
I would look for a good NGL-3 EP grease, thicker than your run of the mill NGL-2.
And I'm with Spork, moly-d is pretty much always a good thing.
I'm shocked that any company that knows how to properly heat treat 300M wouldn't include grease or instructions with their joints. I've never heard of that brand of joint, care to share any info you may have about them?
And I'm with Spork, moly-d is pretty much always a good thing.
I'm shocked that any company that knows how to properly heat treat 300M wouldn't include grease or instructions with their joints. I've never heard of that brand of joint, care to share any info you may have about them?
ChestonScout
opinions are like Jeeps..
- Location
- Clinton, Ut
Find out what CTM or Yukon recommends for their joints.
I had the Yukon superjoints. The grease was copper based but I cant remember what it was called.
They came with a tube of grease and their own grease gun!
I had the Yukon superjoints. The grease was copper based but I cant remember what it was called.
They came with a tube of grease and their own grease gun!
Tacoma
Et incurventur ante non
- Location
- far enough away
http://www.nitro-gear.com/. Their website does have a phone number to call, and I would guess they know what lube they want you to use. I would run what they tell you when you call.
