Black Label
Owner Black Label Design
- Location
- Northern Utah
As the guy who was piloting the “Sky High Comanche” I can say, I will never do that again. It was a hell of a ride.
Parts Broke to date:
Broken and bent front axle- when I cut the upper control arms, the front out the diff fell out and left the long side tube.
Crushed lower control arms, and the factory welds broke on the axle.
Both front shocks bent and crushed
Custom 1” cross over steering harden shaft bent
4 - 5/8 carbon fiber heim joints bent broke or failed
242 transfer case broke in half
Engine mounts broke from block
Front pass. side axle bent by the spines
Front chassis cross member
Bent Steering wheel
Parts savable:
6" Springs
Detroit true track
Short side axle
Hubs
Tires and rims Firestone destination M/T
Front and rear drive shafts
As for myself:
Sore neck
Possibly a broke heel
The ride priceless
My heart broke
But the glory will live on.
Parts Broke to date:
Broken and bent front axle- when I cut the upper control arms, the front out the diff fell out and left the long side tube.
Crushed lower control arms, and the factory welds broke on the axle.
Both front shocks bent and crushed
Custom 1” cross over steering harden shaft bent
4 - 5/8 carbon fiber heim joints bent broke or failed
242 transfer case broke in half
Engine mounts broke from block
Front pass. side axle bent by the spines
Front chassis cross member
Bent Steering wheel
Parts savable:
6" Springs
Detroit true track
Short side axle
Hubs
Tires and rims Firestone destination M/T
Front and rear drive shafts
As for myself:
Sore neck
Possibly a broke heel
The ride priceless
My heart broke
But the glory will live on.
Last edited: